Fully rebuilt & tested original German transmission for 1980-1983 Bus models.

VW 3/8" I.D. HIGH-TEMPERATURE OIL HOSE

Boston Marathoner high temperature all purpose hose for use with oil coolers and/or remote oil filter.

Blended nitrile 2 layer fiber spiral reinforced oil resistant hose with a 200-300 working pressure. Will handle high oil temps.

Will not withstand contact with hot exhaust pipes.

This listing is for a one foot section but can be purchased in any length needed and will be sent in one uncut piece!

Stainless Steel Valves

Suitable for either Intake or Exhaust

One piece, forged stainless steel with swirl polished heads

PICK YOUR SIZE!

We have various sizes of stainless steel VW Valves available, pick from the list below.

Sold each

PRE-OWNED CLASSIC TWO-TONE VINTAGE 1950’s VENDO 83 10 CENT COCA-COLA VENDING MACHINE

KEY MISSING - WORKING STATUS UNKNOWN

USED - GOOD CONDITION

EXCELLENT ADDITION TO YOUR VINTAGE COLLECTION!!!

PICK UP ONLY!!!

N0124161 CL Shaft Circlip, Early 16mm

N0124201 Circlip for VW Clutch Cross Shaft, Late 20mm

VW ENGINE TIN FAN SHROUD SHEET METAL SCREWS

Set of 12 screws 6x10mm in size. Fits VW Bug, Bus, Ghia, engine tin. Replace your old, rusted or stripped VW engine tin screws with this new set of zinc screws.

VW ENGINE TIN FAN SHROUD SHEET METAL SCREWS

Set of 24 screws 6x10mm in size. Fits VW Bug, Bus, Ghia, engine tin. Replace your old, rusted or stripped VW engine tin screws with this new set of zinc screws.

VW ENGINE TIN FAN SHROUD SHEET METAL SCREWS

6x10mm in size. Fits VW Bug, Bus, Ghia, engine tin. Replace your old, rusted or stripped VW engine tin screws with this new set of zinc screws. Each

VW BALL JOINT NUTS

Set of four ball joint nuts for Type 3 VW.

Needed when replacing ball joints on a Type 3 Volkswagen

N 11 166.1

N110088 8mm Nuts

M 8 CL 8 ZN Hex Nut Din 934

THE MOST COMMON FASTNER ON AN AIRCOOLED VW. THIS NUT IS 13MM WRENCH SIZE AND IS 8MM X 1.25 THREAD SIZE.

SOME USES INCLUDE BUT ARE NOT LIMITED TO:

CARB TO MANIFOLD

DUAL PORT END CASTINGS TO HEAD

MUFFLER TO HEAD

HEATER BOX TO HEAD

ENGINE CASE PERIMETER

N110624 Cap Oil Drain Plate Nut

Fits all 12-1600cc beetle Style Engines

When adjusting your VW's valves, replace those worn, damaged, or stripped valve adjusting nuts with these new replacements. 8X1.0mm; set of 8.

SOLD AS SET OF 8

M 8 Wave Washer - Waved, Steel Plain. DIN 137 B

Carburetor Base Gasket 30 Pict N137761

Fits Models w/28Pict & 30 Pict Series Carburetors

N144521 Step Stud for VW Drain Plate

6mm x 8mm

VW BRAKE FLUID HOSE

1 foot section of 7mm I.D. cloth-braided brake fluid reservoir hose.

Premium quality made in germany. Looks and works like the original brake fluid reservoir hoses.

For brake fluid only; not for fuel!

Sold per foot. 1 foot or 100 feet, put how many feet you need into the quanity box. If you purchase more than 1 foot, it will be sent in one uncut piece.

Hose may also come black in color.

VW BRAKE FLUID HOSE

5 feet section of 7mm I.D. cloth-braided brake fluid reservoir hose.

Premium quality made in germany. Looks and works like the original brake fluid reservoir hoses.

For brake fluid only; not for fuel!

Sold per 5-foot piece. 1 quantity = 5 feet, 2 quantity = 10 feet, etc.

If you purchase more than 5 feet, it will be sent in one uncut piece.

Hose may also come black in color.

VW VACUUM HOSE

1 foot section of 3.5mm I.D. German style vacuum hose.

Excellent for use with all vw air-cooled carburetor and air cleaner applications using 3.5mm hose.

Premium quality made in Germany. Made with cloth braid on the outside. Looks and works like the original volkswagen lines!

Sold per foot. 1 quantity = 1 foot, 2 quantity = 2 feet, etc.

Multiple quantities will be sent as one uncut piece.

VW FUEL HOSE

1 foot of 5mm I.D. premium quality German style fuel hose with cloth braid on the outside

Sold per foot. 1 quantity = 1 foot, 2 quantity = 2 feet, etc.

Multiple quantities will be sent as one uncut piece.

VW FUEL HOSE

5 feet of 5mm I.D. premium quality German style fuel hose with cloth braid on the outside

Sold per 5 feet. 1 quantity = 5 feet, 2 quantity = 10 feet, etc.

Multiple quantities will be sent as one uncut piece.

VW FUEL HOSE

1 foot of 7mm I.D. German style fuel hose with cloth braid on the outside

For use on Type 3 fuel injected and '75 up Type 1 fuel injected models

Also fits many European models with early Bosch fi such as Volvo, Saab and MB.

Sold per foot. 1 quantity = 1 foot, 2 quantity = 2 feet, etc.

Multiple quantities will be sent as one uncut piece.

VW FUEL HOSE

5 feet of 7mm I.D. German style fuel hose with cloth braid on the outside

For use on Type 3 fuel injected and '75 up Type 1 fuel injected models

Also fits many European models with early Bosch fi such as Volvo, Saab and MB.

Sold per 5 feet. 1 quantity = 5 feet, 2 quantity = 10 feet, etc.

Multiple quantities will be sent as one uncut piece.

VW TRANSMISSION NOSE CONE

73+ VW TYPE 1 NOSECONE

Water Pump (1185-1265cc) Side Valve, QCP118

NOS - SKU P88624

FITS VEHICLES:

Commer Van 48-75, Hillman Minx Mk3-7 48-54, Hillman Husky 55-57, Sunbeam Talbot 80

PRE OWNED OEM SU PDC1 CARBURETOR

MG MGB

MOFOCO Engine Powdercoating Service

*** Price includes 1 full engine tin set ***

ELGIN PUSH RODS - 81-87 DODGE / CHRYSLER ENGINES - NEW - SET OF 8

ELGIN # PR-345

81-83 Chrysler Cordoba, 81 Chrysler LeBaron, 81 Chrysler Newport, 81-87 Dodge B150, 81-87 Dodge B250, 81-87 Dodge D150, 81-87 Dodge D250, 81-82 Dodge Dart, 81-83 Dodge Diplomat, 81-83 Dodge Mirada, 81 Dodge St. Regis, 81-87 Dodge W150, 81-83 Plymouth Gran Fury, 81-83 Plymouth PB150, 81-83 Plymouth PB250, 82 Chrysler New Yorker, 83 Chrysler Fifth Avenue, 84-87 Dodge D100, 84-87 Dodge W100, 86 Dodge Ramcharger

*** SHIPS IN SET OF 8 PUSH RODS - LIMITED AVAILABILITY ***