021-251-261 Gasket (Silencer to Heat Exchanger)

Located between the exhaust silencer and either heat exchanger.

This part fits all 1700cc 2000cc T2s and T25s up to July 1983; and all 1900cc watercooled units on T25, 1983 1985.

021-251-521 Muffler Strap

Fits: Bus 75-79, Vanagon 80-85

025-251-541A Catalytic Converter Replacement Tube

Vanagon T25 Water Boxer Engine 1.9/2.11cc 7/1981 until 7/1985

 

039-1251-261 Muffler Gasket, Each

2 per car

043-251-187B TAIL PIPE 1975-1979, 35mm, ea

Drivers Side Heat Exchanger for Type 1 Standard Beetle

Passenger Side Heat Exchanger for Type 1 Standard Beetle

111-251-241A Exhaust Gasket Seal Ring

For 1300-1600cc Engines

VW EXHAUST FLANGE GASKET

Steel gasket exhaust flange head for Volkswagen 1200cc-1600cc thru 1975.

VW TAIL PIPE CLAMP KIT

 

Fits Type 1 1600cc engines with stock muffler

One kit for one tail pipe

Made in Germany

 

113-251-053AK Stock Replacement Muffler

Fits:

Beetle 66-73

Super Beetle 71-73

GHIA 66-71

VW SINGLE TAIL PIPE

Make your VW Bug behind shine with this single chrome tail pipe for a stock vw bug muffler.

250mm in length

This is the length that most aircooled VW owners install on their vw bug mufflers. If you are not sure of what size to use, then it is very likely that these chrome vw tail pipes will be what you need.

VW TAIL PIPES

Make your VW Bug behind shine with this is a pair of chrome tail pipes for a stock vw bug muffler.

250mm in length

This is the length that most aircooled VW owners install on their vw bug mufflers. If you are not sure of what size to use, then it is very likely that these chrome vw tail pipes will be what you need.

VW TAIL PIPES

Make your VW Bug behind shine with this is a pair of chrome tail pipes for a stock vw bug muffler.

265mm in length

This is the length that most aircooled VW owners install on their vw bug mufflers. If you are not sure of what size to use, then it is very likely that these chrome vw tail pipes will be what you need.

VW TAIL PIPES

Make your VW Bug behind shine with this is a pair of chrome tail pipes for a stock vw bug muffler.

225mm in length

This is the length that most aircooled VW owners install on their vw bug mufflers. If you are not sure of what size to use, then it is very likely that these chrome vw tail pipes will be what you need.

VW SINGLE TAIL PIPE

Make your VW Bug behind shine with this Single chrome tail pipe for a stock vw bug muffler.

225mm in length

This is the length that most aircooled VW owners install on their vw bug mufflers. If you are not sure of what size to use, then it is very likely that these chrome vw tail pipes will be what you need.

VW TAPERED TIP TAIL PIPES

Pair of tapered tail pipes for Volkswagen Type 1..... 1967-1972.

113-251-265 Manifold preheater gasket small hole, left, Each

For: Type 1 63-74, Type 1 60-71

TYPE 1 BUG, GHIA, BUS, FASTBACK, SQUAREBACK OR ANY BUGGY, RAI OR HOME BUILT THAT USES FRESH AIR HEATER BOXES. THIS REPAIR PIPE IS POUNDED INTO THE END OF THE HEATER BOX THAT INSERTS INTO THE MUFFLER

113-255-165 Heater Hose Connecting Pipe, Each

Hook up your fan shroud heater hose to your stock muffler

Fits:  Beetle 63-74, GHIA 63-74, Bus 63-71, Thing 73-74

113-255-341A Wide clamp from muffler to heater box, each

Originally fits a stock VW muffler and heater boxes, clamps the fresh air intake from the stock muffler to the top of the heater boxes, 2 clamps are required.

Fits: Beetle 63-77, Super Beetle, 71-79, Bus 63-71, GHIA 63-74

191-253-111 VW, F/PIPE SPRING CLIP, RABBIT, CONV. P/UP, GOLF, JETTA, SCIR.

191-253-115F Exhaust Pipe Gasket

VW TAIL PIPE

For VW Bus 1500-1600CC 1960-71 with stock muffler

Made in Denmark

211-251-245 Bus Muffler Hangers

211-251-301A Volkswagen Transporter Exhaust Muffler Bracket

211-298-007 Muffler Adapter Kit

Fits:

VW1200 PC 34 HP 60-62

VW 1200 Transporter 34 HP 59-62

Only 1 Left In Stock!

 

Description

Tri-Mil Bobcat exhaust system is made in the USA with 1-1/2″ 16 gauge mild steel, mig welded and test fit to ensure optimum quality and performance. This exhaust comes with hardware and gaskets to be installed. This exhaust system comes with a raw steel finish ready for paint or chrome plating.

Fitment Note: Bobcat Exhaust System designed for upright 1300cc, 1500cc & 1600cc motors only. Will not fit the 36HP & 40HP motors!

 

 

311-298-055 Type 3 Tailpipe Mounting Kit

EMPI 3418 - 2 Tip Euro Style Muffler Black with Chrome Tips

1 5/8" FLANGED J-TUBES FOR MERGED HEADER

 

For use with EMPI #7320

EMPI 3459 Comp Exhaust, 1 5/8" w/Straight Stinger, Chrome

Competition =Proven, these systems are designed for maximum horsepower and built to take the punishment of off-road competion. Features a merged, spring-attached collector.

Turbo Muffler Kit (part #3469) is sold separtately for street or controlled area use

Fits 1300-1600cc Type 1 Based Engines

EMPI 3469 Turbo Muffler Kit, 1 5./8", Black

 

Turbo Muffler Kit supplied wih Collector. 

Fits Part #3459, Sold Separately

357-253-144

Exhaust System Hanger, Each

357-253-144E Exhaust System Hanger, Each

EMPI 3666 SINGLE QUIET PACK

Fits all Type 2 EMPI 3 bolt small flange headers in the 1:00 position

EMPI 3696 Swivel Flange Stinger

The Swivel Flange Stinger Eliminates the guess work.  The stinger will rotate to any desired position until tightened.  

EMPI 3697 Swivel Flange Stinger, Chrome

The Swivel Flange Stinger Eliminates the guess work.  The stinger will rotate to any desired position until tightened.  

PHAT BOY MUFFLER FOR MERGED EXHAUST

 

Type 1 only

EMPI 3780-1 Fiberglass-Wrapped Baffle

Fiberglass Wrapped Baffles reduce back-pressure

433-253-115 Exhaust Manifold Gasket

803-253-143C Muffler Exhaust Clamp 49.5mm, Each