VW E-BRAKE CABLE SHORTENING KIT

Shorten your emergency brake cable quickly and easily.

A must for Volkswagen Buggies with shortened pans.

VW THROTTLE CABLE SHORTENING KIT

Shorten your Volkswagen throttle cable quickly and easily.

End is designed for use with barrel nut.

VW THROTTLE CABLE EXTENDING KIT

2-piece Volkswagen throttle cable extending kit that can be installed onto the existing end of a throttle cable.

VW STEERING SHAFT SUPPORT

This Volkswagen steering shaft support fits 7/8" sterring shafts and is self-aligning for easy installation.

Features an oil impregnated bronze bushing with oiling cup for longer life!

VW TRANSMISSION MOUNT KIT

This Volkswagen Bug to Bus transmission mount kit allows for installing a Type 2 I.R.S. transmission into a Type 1 chassis. Featuring a heavy duty steel saddle, mount, and straps, eliminate your stock mounts & saddle for maximum support with no flex. A must for competition use!

Your particular application will dictate the proper axle length needed. CV's and components you may need.

VW THROWOUT BEARING

This EMPI branded throwout bearing fits VW models 1970 & earlier: Bug / Beetle, Karmann Ghia, Type 2 Bus Transporter, and Type 3.

VW SMALL INTAKE BOOT CLAMPS

For Type 1 Volkswagen dual port engines.

Sold in pairs.

VW LARGE INTAKE BOOT CLAMPS

Sold in pairs.

VW INTAKE MANIFOLD GASKETS

Fits Type 2 & Type 4 engines; 1700-2000CC. 3 & 4 bolt gaskets.

Sold in pairs.

VW DUAL PORT INTAKE MANIFOLD END KIT

This dual port intake manifold end castings kit is thick enough for porting and polishing. Made for VW 71-74 dual port engines.

These new ball burnished aluminum end castings come complete with necessary hardware and intake boots. Replaces VW part # 113-129-709G & 113-129-710D

EMPI 3245 Carburetor Adaptor For Alternator Conversion

Sometimes necessary when doing an alternator conversion. Spaces up the stock carburetor.

Comes with studs, nuts, and gaskets.

FOR 28/30 PICT CARBURETORS ONLY!

VW INTAKE MANIFOLD GASKETS

Dual port intake manifold gaskets for dual 40mm carburetors.

Sold in pairs.

VW INTAKE MANIFOLD GASKETS

Dual port Volkswagen intake manifold gaskets with larger intake face.

Sold in pairs.

EMPI 33-5000 OIL THERMOSTAT ONLY W/3/8" NPT

Mounts in-line and bypasses oil cooler until oil warms up to approximately 175 degrees. 

Always partially open to avoid over pressurizing. 

A must in performance and cold-weather applications.

Sold separately, fittings P/N: 9211 or 9212 and clamps P/N: 9225

For complete kit with fittings and clamps P/N: 33-5010

EMPI 33-5010 OIL THERMOSTAT W/FITTINGS AND CLAMPS

Mounts in-line and bypasses oil cooler until oil warms up to approximately 175 degrees. 

Always partially open to avoid over pressurizing. 

A must in performance and cold-weather applications.

VW EXHAUST SYSTEM

Single Quiet System Type 1 & Ghia, 1300-1600cc, 66-73 These precision designed systems feature 1 1/2" Tubing and Large 3 Bolt Muffler Flange. Mufflers feature Black tips. All systems include aluminum flex hose and installation kit.

VW CARBURETOR BASE GASKETS

TWO Base gaskets for 40/44 IDF/DRLA Volkswagen carburetors.

VW HEATER BOX J-TUBES

J-Tubes replace stock heater boxes, eliminating heater and saving weight. Fits most heater systems and includes gaskets.

Sold in pairs. Fits all up-right engines.

VW TYPE 1 ALUMINUM HEATER HOSE

Contains no paper. Heat and corrosion resistant to 450 degrees.

Sold Each

VW MUFFLER FLANGE GASKETS

Package of two VW large 3 bolt exhaust flange gaskets

VW EXHAUST PORT GASKETS

Pack of four 1 1/2" I.D. gaskets

For Volkswagens with1200-2332cc engines

VW EXHAUST TO HEAD GASKET

Fits 1200cc-2332cc Volkswagens

VW MUFFLER FLANGE GASKETS

Package of two VW small 3 bolt exhaust flange gaskets

EMPI 3395 Exhaust Port Gasket, 1200-1600cc, 1 5.8"

Pack of 4

VW CARBURETOR BASE GASKET

A VW carburetor base gasket for Weber Carburetors; 40/44/48 IDA Gasket

EMPI 3405 Muffler Flange Gasket, 2-Bolt

Pack of 2

VW MUFFLER FLANGE

Volkswagen large 3 bolt muffler flange.

2 9/16" I.D.

VW EXHAUST SYSTEM

New 4-tip "Monza" GT style exhaust system that fits 1600cc based Type 1 Volkswagen engines.

These are also great for kit cars like Bradley, GT, etc.

Note: this item has about 1 3/4" less ground clearance than the 2-tip mufflers do.

VW EXHAUST SYSTEM

This chrome two tipped VW GT muffler with header looks and sounds great! Use it with heater boxes or J-Pipes. The chrome tips line up with stock VW cut-outs on Bug rear apron.

Works with VW Type 1 1500cc, 1600cc, and larger. Also works well on Speedster replicas!

VW HEAT RISER BLOCK-OFF PLATES

These block-off plates cover heat riser flanges when intake heat riser is not used. A must when installing most dual carburetor kits.

Includes gaskets.

VW EXHAUST SYSTEM

This single-tip GT exhaust system muffler gives your Volkswagen a european look. Featuring chrome tips with built in resonators for that unique "GT" sound!

Fits 1300-1600cc engines including Volkswagen Type 1, Ghia, and Type 2 (1963-1971)

VW EXHAUST FLANGES

These 1 3/8 I.D. flanges bolt directly to Type 1 VW heads and can be used when creating or customizing an exhaust system for your VW engine.

Sold as pair

VW FRONT LEFT FLOOR PANEL

Don't install your new carpet over dangerous, old rusted-out floors! Metal replacement floor panels make it fast and easy to make repairs.

Fits VW Type 1 beetle chassis manx, dune buggy

Without seat rails. Requires cutting fitting and welding.

VW FRONT RIGHT FLOOR PANEL

Don't install your new carpet over dangerous, old rusted-out floors! Metal replacement floor panels make it fast and easy to make repairs.

Fits VW Type 1 beetle chassis manx, dune buggy

Without seat rails.  Requires cutting fitting and welding.

VW REAR LEFT FLOOR PANEL

Don't install your new carpet over dangerous, old rusted-out floors! Metal replacement floor panels make it fast and easy to make repairs.

Fits VW Type 1 beetle chassis manx, dune buggy

Without seat rails. Requires cutting fitting and welding.

VW REAR RIGHT FLOOR PANEL

Don't install your new carpet over dangerous, old rusted-out floors! Metal replacement floor panels make it fast and easy to make repairs.

Fits VW Type 1 beetle chassis manx, dune buggy

Without seat rails.  Requires cutting fitting and welding.

VW EXHAUST SYSTEM

The most popular of our extensive precision-designed VW exhaust systems. These systems feature 1 3/8" tubing with small 3 bolt muffler flange and flared chrome muffler tips.

Fits Type 1 & Ghia 1200-1600cc. Will NOT work with Type 3.

All systems include aluminum flex hose and installation kit.

VW DUAL QUIET EXHAUST SYSTEM

The most popular of our extensive precision-designed VW exhaust systems. These systems feature 1 3/8" tubing with small 3 bolt muffler flange and flared chrome muffler tips.

Fits Type 1 & Ghia, 1300-1600cc, 66-73

All systems include aluminum flex hose and installation kit.

TYPE 3 VW HEATER BOX J-TUBES

J-Tubes replace stock heater boxes, eliminating heater and saving weight. Fits most heater systems and includes gaskets.

Sold in pairs.

VW EXHAUST SYSTEM

The most popular of our extensive precision-designed VW exhaust systems. These systems feature 1 3/8" tubing with small 3 bolt muffler flange and flared chrome muffler tips.

Fits Type 3, 1500-1600CC.

All systems include aluminum flex hose and installation kit.

VW MUFFLER FLANGE

Small 3 bolt Volkswagen muffler flange

1 3/4" I.D.

EMPI 3844 VW SEAT BELT BUG BUS DUNE BUGGY 2 POINT LAP