VW CYLINDER SHIMS

.010" cylinder shims for VW Type 1. 94mm cylinders

These steel shims allow for adjusting the deck height without machining the pistons. Corrects for increase in stroke and compensates when the case is surface machined clearanced for standard 8mm studs.

VW .02" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 94mm bore VWs.

VW .03" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs.  Set of 4. Fits 94mm bore VWs.

VW .040" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs.  Set of 4.  Fits Type 1 VWs with a 94mm big bore.

VW .06" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 94mm bore VWs.

VW .09" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 94mm bore VWs.

VW .04" CYLINDER HEAD SPACERS

VW steel cylinder head spacers (.040") allow for adjusting deck height easily without removing the cylinders. Compensates for zero deck height when heads have been machined, or in stroker setups. Set of 4.

VW FRONT END ADJUSTER, BALL JOINT

For use on models from 1966 and LATER

Requires one on each tube; cutting and welding required!

VW FRONT END ADJUSTER, LINK PIN

For use on models from 1965 and prior.

Requires one on each tube; cutting and welding required!

VW CASTER SHIM KIT

Aluminum caster shims correct and improve front end geometry on your lowered Volkswagen.

Bug, Ghia, Type 3

Use longer bolts, EMPI 22-2816, for proper thread grip at pan head.

VW CASTER SHIM BOLTS

These are the bolts that hold the axle beam to pan.

They are longer to allow for the caster shims; but they can still be used to replace a stock bolt.

Work well with EMPI 22-2815 caster shims

VW BALL JOINT CAMBER ADJUSTERS

Camber adjusters for ball joint front end

For use with stock or lowered VW front ends

VW CLEARANCED BALL JOINT, UPPER

Specially modified ball joints provide more suspension travel on lowered or raised Bugs.

Fits all Type 1 Volkswagens from 1966-77

VW CLEARANCED BALL JOINT, LOWER

Specially modified ball joints provide more suspension travel on lowered or raised Bugs.

Fits all Type 1 Volkswagens from 1966-77

VW NARROWED LEAVES

Narrowed leaves/axle beam tortioned leaves for link pin

Fits Type 1 Volkswagens

Two sets required for narrowed VW front end

VW DROP SPINDLES

2.5 inch drop spindles for link pin axle with drum brakes

Fits 1965 and earlier VW Bug, Buggy, Ghia

See item page for more details.

VW DROP SPINDLES

2.5 inch drop spindles for ball joint axle beam with drum brakes

Fits 1966-1977 VW Bug, Buggy, Ghia

See item page for more details.

VW REAR DISC BRAKE CONVERSION KIT

VW rear disc brake conversion kit with emergency handbrake for all Swingaxle Type 1s & IRS 68-72. Includes Beetles, Buggys, Sandrails. Kits are available for both swing axle and IRS Type 1 based applications. All kits come complete with rotors, calipers, cables all necessary hardware.

Standard 4x130 bolt pattern

VW REAR DISC BRAKE CONVERSION KIT

VW rear disc brake conversion kit with emergency handbrake for all IRS & Swingaxle Type 1s. Includes Beetles, Buggys, Sandrails. Kits are available for both swing axle and IRS Type 1 based applications. All kits come complete with rotors, calipers, cables all necessary hardware. This deluxe kit comes with HD cast mounting brackets

Standard 4x130 bolt pattern

VW REAR DISC BRAKE CONVERSION KIT w/E-Brake

VW rear disc brake conversion kit with emergency handbrake for Type 1 Bug, Beetle, Ghia IRS 1973-1979. Kit comes in Standard VW 4x130 Bolt Pattern with 14 x 1.5mm threads (not included in kit). Kit does include Rotors, Calipers with brake pads, Emergency Brake Cables, Caliper Mounting Brackets, Axle Spacers, Gaskets & Hardware

VW REAR DISC BRAKE CONVERSION KIT w/E-Brake

22-2871-F

*Deluxe Kit with Forged Brackets*

VW rear disc brake conversion kit with emergency handbrake for Type 1 Bug, Beetle, Ghia IRS 1973-1979. Kit comes in Standard VW 4x130 Bolt Pattern with 14 x 1.5mm threads (not included in kit). Kit does include Rotors, Calipers with brake pads, Emergency Brake Cables, Caliper Mounting Brackets, Axle Spacers, Gaskets & Hardware

Front Disc Brake Kit

Wide 5 VW Bolt Pattern

EMPI 22-2880 Front Disc Brake Kit, Link Pin, 5 lug, 5/205, 15" Rims to 65

A special brake rotor and caliper mount bracket combined to give you a premium disc brake upgrade using your existing front spindles.

Kit comes complete with master cylinder, brake lines, floating calipers with brake pads, wheel bearings, grease seals and all necessary hardware.

Now you can have the stopping power of disc brakes and have the early 5 on 205 rim of your choice, and no adapters!

WILL NOT WORK WITH DROP SPINDLES.

Caliper guide pins pre-installed.

VW REAR DISC BRAKE PADS

Rear disc brake pads replacement for EMPI Calipers.

These are the pads that are used in many of the rear disc brake kits that EMPI sells.

For rear calipers with emergency brakes.

Wide Rear Disc Brake Kit w/o E-Brake

EMPI 22-2930 Wide Rear Disc Brake Kit w/o E-Brake

5/205, Swing Axle 58-67 Wide Track rear disc brake kits are for Off-Roaders who are looking to increase their rear wheel "track".

Kits are without emergency brakes, and come complete with 1-piece minimum offseet 1" extra wide rotors, calipers, pads, mounting brackets, and all necessary hardware and gaskets for the complete installation.

Rotors are threaded for 12mm and 14mm studs.

VW DROP SPINDLES

2.5 inch drop spindles for link pin axle with disc brakes

Fits VW Bug, Buggy, Ghia with disc brakes

See item page for more details.

VW DROP SPINDLES

2.5 inch drop spindles for ball joint axle beam with disc brakes

Fits all Type 1 ball joint front end

See item page for more details.

PADS FOR STEEL BRACKET KITS

EMPI 22-2966 Pads for Steel Bracket Kits

Set of 4

VW FRONT DISC BOLT-ON BRAKE KIT

VW front disc brake kit for link pin style applications. Bolt-on 5/130 pattern.

Kit includes bolt-on heavy duty brackets and conversion bearings. Hardware included. Four bolt pattern shown for picture only.

Carburetor Tune up Kit

EMPI 2202 Carburetor Tune up Kit WEBER Progressive, DFV, Holley 5200, EPC 32/36F (VW).

Basic repair kit come complete with needle/seat, all necessary o-rings and gasket.

Kit also includes floats and accelerator pump diaphragms.

Carburetor Tune up Kit

EMPI 2238 Carburetor Tune up Kit Holley Bug Spray

Basic repair kit comes complete with needle/seat, all necessary o-rings and gasket.

Carburetor Tune up Kit Zenith 32NDIX - Minor

EMPI 2258 Carburetor Tune up Kit Zenith 32NDIX - Minor. 

Basic repair kit come complete with needle/seat, all necessary o-rings and gasket.

VW CARBURETOR REPAIR KIT

Basic VW carburetor repair kits comes with accelerator pump diaphram, needle/seat, and all necessary o-rings & gaskets.

Note: kit includes all parts needed for one carburetor; if dual carb engine, two kits are needed.

Kit parts include only what you see in picture

EMPI 2365 Carburetor Tune-up Kit

WEBER 34 ICH, EPC 34X

34ICT

The kit is a basic repair kit and comes complete with needle/seat, all necessary 0-rings and gaskets. 

VW HOOD HOLD DOWNS

One pair of rubber hood hold downs for VW hoods

4 3/4" overall length of rubber

For VW Beetles, Dune Buggies, & Sandrails. A must for your Baja Bug!

See item page for more information.

VW HIDDEN STEREO GLOVE BOX

A glove box made with a built-in area to mount your stereo. Perfect for applications where security is an issue or when modifications to the stock dash are not desired.

Fits VW Bug Beetle from 1958-64.

Made from durable black plastic.

Designed for left hand drive models. May not fit right hand drive models.

VW OIL PUMP COVER

Precision machined from cast iron with a high quality finish & ground gear/gasket surface, this is the best pump cover available! Impoved design decreases pulley and sheet metal clearance issues.

Cover is threaded 3/8" NPT and comes with complete 1/2" hose fitting & gasket.

Fits all VW pumps with 8mm bolt holes.

Electric Fuel Pump Mount Kit

EMPI 31-3010 Electric Fuel Pump Mount Kit

Fuel Pump Mount Kit allows for the installation of EMPI or Facet electric fuel pumps in the stock pump location. Hardware and gasket included.

Billet Fuel Pump Block-off w/hardware

EMPI 31-3011Billet Fuel Pump Block-off w/hardware

Fuel Pump Block-off/Mount Block off with 12mm threaded breather boss.

Block off in high tech polished Billet aluminum. Includes mounting gasket.

EMPI 3137 Replacement Pins & Clips, Long, Pair

HYDRAULIC PARK LOCK

This hydraulic park lock holds your Volkswagen brakes locked by using line pressure.

Just push brake pedal down and then push the park-lock lever. (Not to be used as an emergency brake)

Lock should be placed by your shifter. It should interrupt the break line to the rear.

EMPI 3157 Belly Pan Gasket

Installs between body and pan providing a water-tight seal.

Great for body-off restorations, Kits cars, Baja Bugs and Dune Buggies

VW CABLE SHORTENING KIT

Shorten your clutch, emergency brake and throttle cables quickly.

A must for all buggies that have shortened pans.

CLUTCH CABLE SHORTENING KIT

Shorten your clutch cable quickly and easily.

A must for off-road Buggies!