MOFOCO 050 RASSER AIR COOLED VW CYLINDER HEAD

# MFC-CCH050R
 Mofoco
MONSTER!
MOFOCO 050 RASSER AIR COOLED VW CYLINDER HEAD

More high detail pictures available further down the page.

VW cylinder heads are the best "bang for your buck" on increasing horsepower in your Volkswagen engine. This is because horsepower comes primarily from two things:

- The size of the engine itself; ;
- The air flow and valve size of the heads.

This is why MOFOCO invented the 050 RASSER Big Valve Cylinder Head. The 050 head is the biggest, baddest high performance VW head you can get without going to full out drag racing heads!

The 050 RASSER features 40mm stainless steel intake valves and 35.5mm stainless steel exhaust valves. We specifically designed the 050 Rasser for 1776cc to 2110cc engines.  They are recommended for higher lift cams and dual carbs for the best performance.

After 20+ years of success, 050's have been upgraded for more flow as cast, no step 55cc combustion chambers for maximum quench, more airflow through the head for maximum cooling, added material so boring for 94mm cylinders won't break through to the fins and now come standard with chromoly retainers.  With the intake port volume at 64cc, the port velocity is perfect for a street performance cylinder head.

Mofoco 050 Flow Numbers---Tested at 25" with an IDF manifold

Lift                       Intake                 Exhaust

.100                      53                         48

,200                      96                         80

.300                     124                       100

.400                     137                       114

.500                     148                       120

.600                     157                       122

 

Cast at Eck Industries in Manitowoc, WI

Machined in-house completely by Mofoco.

This means the 050 RASSER is manufactured 100% in the United States... from the raw materials to make the casting, all the way to the final product to be installed on your engine. These 050 heads are not simply rebuilt off Brazil castings or made in China.

Detailed specifications for the MOFOCO 050 Cylinder Head:

  • Approved for unleaded, plain old gas station fuel!
  • Also safely runs with leaded, aviation, and racing fuels without modification
  • 40mm Stainless Steel Intake Valve
  • 35.5mm Stainless Steel Exhaust valve
  • 55cc No Step Combustion Chambers
  • D-Shaped Intake Port
  • Heavy Duty Springs & Retainers
  • Silicon Brass Valve Guides
  • 3 Angle Valve Job
  • Aircraft Casting Technology from a foundry in Manitowac, Wisconsin
  • Larger & Smoother Port Design for Better Flow
  • Thicker Port Walls & Larger Intake Face
  • 3/4 Inch Reach Spark Plugs
  • Thicker & Stronger Cooling Fins - and more than the competition
  • Thicker Combustion Chamber Ceiling
  • Standard Bore - larger sizes available
  • Machined on CNC-NC Milling Machines

These come standard to fit stock 85.5 Cylinders. If you would like a larger bore please specify the size you need when placing your order below.

Note: These heads are priced individually. It is strongly recommended you purchase a pair for optimal performance

Also, we can match port intake manifolds to match the D-shaped intake port design. It is typically $80/pair for this service.

Keep in mind that the biggest, baddest cylinder head such as an 050 is not necessarily the best idea, depending on the size of your VW engine. Mofoco 050's are absolutely the head of choice for a high horsepower, big engine set up, however a smaller head such as the MOFOCO 042 may be better choice if you have a "tamer" or lower capacity engine (under 2000cc). If you need guidance on which heads or other upgrades would be the best choice for your air cooled VW setup, call our team of VW specialists at 414-963-1020 with the details and goals of your vehicle.

Price: $339.99
Machine Head for Dual Plugs

IMG_2879.JPG

Dual 12mm Spark Plugs  $100.00
Manley Valves
Manley Racing Stainless Steel Valves  $75.00
Flycut and CC Heads

Please specify CC in the order notes section during checkout

Flycut from 46cc to 54cc  $35.00
Flycut from 45cc to 35cc  $65.00
Flycut from 28cc to 34cc  $115.00
Dual Springs

Dual Springs are recommended for hi-rev applications.

Dual Springs  $20.00
Bore Size

Select the desired bore size. Standard size of 85.5mm & 87mm cylinders; 90.5/92mm or 94mm sizes are available.

85.5 / 87mm 
90.5 / 92mm  $25.00
94mm  $35.00
Quantity:  head