EMPI 8341 I-Beam Rod, 5.500" VW Journal 2.165"/55mm (EMPI Rod Bolts)

VW I-BEAM CONNECTING RODS

EMPI 4140 CHROMOLY I-BEAM RODS use the OE design but are forged from 4140 chromoly to give you a high strength rod that's easy on your budget. 3/8" 8740 200,000 psi tensile load rod bolts add all the strength and reliability necessary for this rod design. Radiused caps aid in stoker clearancing. Combine with an EMPI counter weighted crank to build a dependable lower end for moderate performance engines. Torque these 3/8" bolts to 39 ft. lbs. Sold in matched weight sets of 4.

EMPI 8355 ARP 8740 3/8" I-Beam Rod Bolts Only, Set of 8

ARP 3/8" I-BEAM ROD BOLTS

Torque these bolts to 39 ft, lbs.

VW BILLET STYLE OIL DIPSTICK

Stock length dipstick with machined aluminum billet-style handle.

Designed to fit both stock and aftermarket engine cases.

EMPI 8510 Billet Window Glass Crank Handle Vw Bug Door

Dress your VW in the machined aluminum look with these billet style window crank handles! Fits ALL VW models & years.

VW STAINLESS STEEL PUSH ROD TUBES

These stainless steel push rod tubes w/o seals are the ultimate in strength and good looks for your VW! No rust or corrosion to deal with because these are stainless steel. Fits all 1300-2332cc; set of 8.

VW WINDAGE PUSH ROD TUBES

Get your oil under control! These performance windage push rod tubes extend further into the case to prevent oil from over filling the valve coves during cornering or hard race use. Set of 8. Stainless steel to resist corrosion.Seals not included

Fits:

All 1300-1600cc style Type 1 engines
VW Bus 1500cc & 1600cc... 1963-71 only

VW ENGINE OIL BREATHER KIT

High revving modified engines require more crankcase ventilation than stock breathers.Reduce crankcase pressure and eliminate blow-by and oil loss with this VW cast aluminum oil breather kit!

Fits all Type 1's and Ghias & includes all hardware and heavy duty breather hose.

VW ENGINE CHROME & RED SHROUD TIN DRESS UP KIT

Kit features all chrome accessories. For VW Type 1 engine. View the item page for complete item list.

VW ENGINE CHROME & BLUE SHROUD TIN DRESS UP KIT

Kit features all chrome accessories. For VW Type 1 engine.  View the item page for complete item list.

VW DECK LID SPRING

Replace your stock Volkswagen deck lid spring with a chrome one!

Empi 8671 36hp Fan Shroud with Heat Ducts

VW BLACK FAN SHROUD

Dog house-style VW Bug black fan shroud for no heat ducts

VW BLACK FAN SHROUD

Dog house-style VW Bug black fan shroud for with heat ducts

EMPI 8688 Sand Seal Pulley Kit, Bolt-In

SAND SEAL PULLEY KITS

EMPI 8688 Sand Seal Pulley Kit, Bolt-In

5-Hole style and come with black degree numbers and marks.

Seals, collars and spacers are included.

VW PULLEY SPACER SET

.090" thickness

Increase horsepower thru precision timing and valve settings with this bolt-on Volkswagen high grade polished aluminum degree crankshaft power pulley!

VW REPLACEMENT SEAL FOR BOLT-IN & MACHINE-IN

Standard size sand seal pulleys.

VW REPLACEMENT SEAL FOR BOLT-IN

Made for standard size bolt-in pulleys only!

EMPI 8696 Sand Seal Pulley Kit, Bolt-In

SAND SEAL PULLEY KITS

EMPI 8696 Sand Seal Pulley Kit

MACHINE IN SEAL - Requires Cutting of the Case

5-Hole style and come with black degree numbers and marks.

Seals, collars and spacers are included.

VW SAND SEAL PULLEY KIT

Sand seal polished aluminum power pulley kit featuring machine case version with 5 hole design.

Full 360-degree markings in black. Includes seal.

EMPI 87-9917 CV Joint ONLY, Type 2 & Vanagon

100mm O.D., .750" Balls

Each

VW ENGINE CHROME TIN KIT

Dress your VW engine in chrome with this kit.  For VW Type 1 engine.  View the item page for complete item list.

VW ENGINE CHROME TIN KIT

Dress your VW engine in chrome with this kit.  For VW Type 1 engine.  View the item page for complete item list.

VW ENGINE SUPER CHROME SHROUD TIN KIT

Dress your VW engine in chrome with this kit.  For VW Type 1 engine.  View the item page for complete item list.

EMPI 8747 Vw Bug Bus Engine Wire Wires Seperator Chrome

Chrome wire seperator kit that is easy to install and give you that detailed look! Complete kit includes five 2-wire and one 3-wire seperator with an allen wrench for assembly. Fits 4 cylinder engines

EMPI 8748 Vw Bug Bus Engine Wire Wires Seperator Red

Red wire seperator kit that is easy to install and give you that detailed look! Complete kit includes five 2-wire and one 3-wire seperator with an allen wrench for assembly. Fits 4 cylinder engines

EMPI 8749 Vw Bug Bus Engine Wire Wires Seperator Blue

Blue wire seperator kit that is easy to install and give you that detailed look! Complete kit includes five 2-wire and one 3-wire seperator with an allen wrench for assembly. Fits 4 cylinder engines

EMPI 8750 Vw Bug Bus Engine Wire Wires Seperator Yellow

Yellow wire seperator kit that is easy to install and give you that detailed look! Complete kit includes five 2-wire and one 3-wire seperator with an allen wrench for assembly. Fits 4 cylinder engines

EMPI 8751 Vw Bug Bus Engine Wire Wires Seperator Black

Black wire seperator kit that is easy to install and give you that detailed look! Complete kit includes five 2-wire and one 3-wire seperator with an allen wrench for assembly. Fits 4 cylinder engines

Empi 8777 Vw Beetle Bus Buggy Engine Crankshaft Pulley

Increase horsepower with precision timing and valve settings with this High grade polished aluminum VW standard size crankshaft pulley that fits all Type 1s. Full 360 degree timing marks, screened on with a special process for longetivity.

VW CRANKSHAFT PULLEY

Increase horsepower with precision timing and valve settings with this High grade polished aluminum VW standard size crankshaft pulley that fits all Type 1s. Full 360 degree timing marks, screened on with a special process for longetivity.

No-hole solid billet style.  Outer band with black timing marks.

EMPI 8790 Vw Bug Engine Distributor Cap Clear

Dress up your engine compartment with this clear distributor cap! Fits "009" and stock distributors.

Replaces Bosch part # 03010 or 03172

Dress up your engine compartment with this red distributor cap! Fits "009" and stock distributors.

Replaces Bosch part # 03010 or 03172

VW AIR CLEANER

This high quality VW air cleaner features washable gauze element.

The replacement gauze is 3 1/2" high and has a 6" diameter.

EMPI 8810 Braided Stainless Line

1/4" Braided Stainless Line provides good looks and reliability

1/4" x 5' Length

Hi Performace C-Channel Bolt-on Valve Covers

Emp 8852 C-Channel Valve Cover Set

Made from investement cast aluminum, with cast in EMPI logo and polished ribs on a black background. 

The finned design helps reduce upper clyinder head temperature and there is enough clearance for most high lift rocker arms. 

It also has a boss that can be drilled for venting to a breathe box. 

The special C-Channel type seals and stud seals insure positive sealing. 

Complete with all gaskets and hardware.

VW CHROME MAGNETIC OIL DRAIN PLUG

Helps keep your oil free from metal bits and shavings. Includes sealing washer.

EMPI 8868 Replacement Channel Gaskets, Pair

For EMPI 8852 Valve Cover Set

VW CYLINDER HEAD COOL TIN SET

Black cylinder cool tin set for VW Beetles, Buggys, and Sandrails. Fits most big bore kits.

VW DOGHOUSE TIN SET

This 2-piece tin set attaches to the back of a doghouse type shroud to direct the hot air coming off the cooler out of the engine compartment. Complete with seals.

VW CHROME DOGHOUSE FAN SHROUD

Volkswagen Bug chrome no heat ducts

VW CHROME DOGHOUSE FAN SHROUD

Volkswagen Bug chrome with heat ducts

EMPI 8894 Doghouse Oil Cooler to Case Adapter, for 98-1161-B Only (Ref. P/N: 113-117-303)

VW CHROME DOGHOUSE TIN SET

This 2-piece VW chrome doghouse engine tin set attaches to the back of a doghouse type shroud to direct the hot air coming off the cooler out of the engine compartment. Complete with seals.

EMPI 8898 Alternator Generator Fan Hardware Kit

Zinc plated fan hardware kit needed to attach a cooling fan.

EMPI 8899 BILLET ALUMINUM OIL FILLER CAP W/GROOVES

Billet Oil Cap with easy grip grooved style. 

Cap fits EMPI threaded filler tubes as well as most other threaded aluminum oil fillers

EMPI 8902 Generator Brush Cover, Each

GENERTOR BRUSH COVER

Our black platic Generator Brush Cover keeps dirt and moisture out of the generator, helping to extend generator life. 

Fits BOSCH GR15/17 generators.

EMPI 8903 Chrome Alternator/Generator Strap

Stock style clamp in polised Chrome. Secures 12-volt alternator or generator while adding a finished look.