VW URETHANE SPRING PLATE BUSHINGS PAIR

The strength and durability of urethane will out-last and out-perform standard rubber products in every application.

Replaces early Volkswagen Type 1 & Type 3 style outer spring plate/torsion bar bushings

Bug, Ghia, Dune Buggy, Sandrail, Trike

See item page for more fitting information.

VW URETHANE SPRING PLATE BUSHINGS PAIR

The strength and durability of urethane will out-last and out-perform standard rubber products in every application.

1 3/4" inside diameter

Fits VW Type 1 style spring plate/torsion bars only

Bug, Ghia, Dune Buggy, Sandrail, Trike

EMPI 16-5161 Stainless Steel T-Bolt Style Alternator/Generator Strap

The ultimate alternator/generator strap. The great and long lasting looks, strength, and durability of stainless steel with the positive security of the t-bolt style. A must for off roading.

EMPI 16-8242 UNDER FENDER OIL FILTER MOUNT, TYPE 1 THRU 73'

Remote Oil Fitler Mounts. Bolt-on full flow oil filter mounts make filter mounting easy. Covers street sedan applications by cleanly tucking the filter up under the rear fender on a black powder coated steel mount that attaches with the bumper bracket bolts. Hardware Included. 

VW OIL SUMP PLATE

This billet aluminum sump plate will never bend or distort due to over-tightening, unlike stock plates that can cause dangerous leaks. Since it is CNC machined from high grade aluminum billet, it also adds a custom look to any engine!

EMPI 16-9512 BILLET "OIL" FILLER CAP

Billet Oil Cap with "OIL" etched on the top 

Cap fits EMPI threaded filler tubes as well as most other threaded aluminum oil fillers

VW THREADED OIL GALLEY PLUG KIT

This kit is the first step to any quality engine build. By installing this 12-peice oil galley plug kit, you will realize the advantage and ease of cleaning and inspecting the "life blood" passages of your oiling system. Each kit contains seven 1/8" npt, two 1/4" npt, and three 3/8" npt threaded plugs. Machining of case required

Billet Type 3 Block off Kit

Empi 16-9516 Billet Type 3 Block off Kit Use on late style and Type 3 cases to block off oil fill opening to convert to upright applications. Complete with cast aluminum block-off plate and gasket.

Use on late style and Type 3 cases to block off oil fill opening to convert to upright applications. Complete with cast aluminum block-off plate and gasket.

EMPI 16-9519 Main Bearing Dowel Pin Set

This set of 5 dowel pins is used to align the main bearings. Includes five to do a complete install.

Fits all air cooled VW models

VW MINI OIL SUMP KIT

Help prevent oil starvation in your VW by installing this "mini" sump to increase oil capacityin your  VW Bus, Bug, or Ghia. Kit comes with 3 different size pick-up tubes, studs, nuts, and gaskets.

Your existing drain plug can be re-used, or use our magnetic drain plug.

VW OIL SUCTION KIT

This kit provides consistent oil pick up in your VW Bug, Ghia, or Bus. The supplied sump plate depression keeps the pick-up extension submerged in oil at all times.

The built in screen helps keep harmful particles from reaching vital engine components. This is a great addidtion to any performance-built engine to insure a longer engine life.

VW PERFORMANCE CRANKSHAFT GEAR SPACER

VW HEX HEAD OIL RELIEF SPRING PLUG

A long overdue solution to the removal of relief plugs. These threaded steel hex head plugs eliminate the need for that giant screwdriver.

Sold as one pair.

COPPER CYLINDER HEAD GASKETS

Set of four copper head gaskets for 90.5-92mm cylinders

Installs between the top of the cylinder and the cylinder head. .040"

COPPER CYLINDER HEAD GASKETS

Set of four copper head gaskets for 90.5-92mm cylinders

Installs between the top of the cylinder and the cylinder head. .050"

COPPER CYLINDER HEAD GASKETS

Set of four copper head gaskets for 92mm cylinders

Installs between the top of the cylinder and the cylinder head. .060"

COPPER CYLINDER HEAD GASKETS

Set of four copper head gaskets for 94mm cylinders

Installs between the top of the cylinder and the cylinder head. .040"

COPPER CYLINDER HEAD GASKETS

Set of four copper head gaskets for 94mm cylinders

Installs between the top of the cylinder and the cylinder head. .050"

34 PICT Carburetor Spacer

EMPI 16-9705 34 PICT Carburetor Spacer, Each Space up your 34 PICT Carburetor to clear the alternator

Each Space up your 34 PICT Carburetor to clear the alternator

VW TRANSMISSION SIDE COVER

Heavy duty aluminum side cover for swing axle

HEAVY DUTY SIDE COVER FOR IRS

EMPI 16-9905 Heavy Duty Aluminum Side Cover for IRS, each

EMPI 17-2795 King Pin Conversion Inner Bearing

VW KING PIN CONVERSION BEARING, OUTER

This outer bearing allows you to install ball joint rotors onto king pin spindles.

Requires new seals

Intake Manifold 30/31/34 Pict

EMPI 17-2805 Intake Manifold 30/31/34 Pict (Ref. P/N: 113-129-701AQ)

This manifold allows for the use of 30 PICT-1, 31 PICT-3 or 34 PICT-3 carburetors without adaptors.

Manifold flange is drilled for either stud pattern and comes with heat risers, gaskets, and 1/8" pipe plug.

Drilled and tapped for optional vacuum advance.

EMPI 17-2809 BILLET F/F OIL LINE BRACKET - BLACK, EACH

Billet full flow hose brackets.

Keep oil lines in check while maintaining that Billet look. Bolts on at exhaust flange and helps protect oil lines from engine and exhaust. Fits up to 3/4" O.D. Hose.

Also comes Polished, P/N: 17-2810

EMPI 17-2810 BILLET F/F OIL LINE BRACKET - POLISHED, EACH

Billet full flow hose brackets.

Keep oil lines in check while maintaining that Billet look. Bolts on at exhaust flange and helps protect oil lines from engine and exhaust. Fits up to 3/4" O.D. Hose.

Also comes in black, P/N: 17-2809

VW BUG ENGINE NARROW OIL SUMP W/ FILTER

Cast aluminum oil sump is only 1 3/4" deep. Adds oil capacity and offers improved filtration and easy bolt on installation. Filter design allows for unimpeded oil flow even if the filter gets plugged. Stainless steel micron filter can be cleaned and reused.

VW BUG ENGINE CASE OIL DUAL BYPASS ADAPTER

This adapter allows you to run both your stock oil cooler, along with an external cooler and/or a remote oil filter.

Fits VW Type 1 with minimal trimming of the sheetmetal. Will not fit doghouse-style coolers.

VW OIL SUMP FILTER

Replacement filter for 17-2871 & 17-2872

Offers improved filtration as easy filter design allows for unimpeded oil flow even if the filter gets plugged. Stainless steel micron filter can be cleaned and reused.

EMPI 17-2878 - VW Bug Type 1 Dual Circuit Master Cylinder Reservoir Mounts on Top

Billet Combo Fuel Pump Block-off/Coil Mount

EMPI 17-2926 Billet Combo Fuel Pump Block-off/Coil Mount

Polished aluminum Combo Mount serves as a fuel pump block-off, breather vent and ignition coil holder.

Features a 3/8 NPT outlet for vent.

Great looking and functional.

Hardware and gasket included.

EMPI 17-2941 OIL FILLER & BREATHER BOX KIT

The EMPI dual-purpose Oil Filler & Breather Box includes a system of internal baffles that separate the oil from the air then returns the oil back to the engine. It mounts upright on the alternator stand making for easy oil filling and was designed to look like part of the engine. The Billet Aluminum filler cap seals with an o'ring. Aluminum construction offers great looks and leak-free operation featuring an o'ring seal and button-head allen top screws. Vent your valve covers, crankcase, air cleaners...whatever your requirements. Comes with attaching nut, o'rings, gasket and instructions.

EMPI 17-2943 BILLET OIL FILLER CAP

Polished Billet Aluminum Cap with knurled edge for easy grip offers a great finishing touch to any breather tube.

Fits: P/N 17-2941 and alternator stands.

EMPI 17-2946 BILLET ALUMINUM OIL COOLER BLOCK-OFF

Billet Aluminum Oil Cooler Block-off

Show quality Polished Billet Aluminum oil cooler block-off. 

Comes with Allen Head Cap Screws for a clean installation along with gasket and hardware.

EMPI 17-2976 Rubber Flange Gauze Air Cleaner

Oval Gauze Rubber Flange Air Cleaner for Stock VW Carb., 2" Neck, 4 7/16"x6 7/8"x2 3/4" High

Featuring a washable and reusable Chrome top and Gauze Filter, they add style and performance and fit most upright applications. Constructed with a super strong molded pliable rubber lfange which absorbs vibration. Neck can be stretched up to 1/16" for added applicatons. Use with or without 90 degree Nylon Vent tube (included). Comes with clamp.

EMPI 1.25 Rocker Arms, W/Bushing, Set

Increase the RPM potential of your air cooled Volkswagen engine and get more power.

EMPI 21-2309 Hi Performance/high Strength Rocker Shaft Kit

Our high-strength Rocker Shaft Kit helps eliminate rocker shaft side play that causes rocker arm galling and clip & washer failure.

Our kit includes two precision ground high strength shafts, hardened steel spacers & solid shims, and all necessary installation hardware is included.

Can be used with either stock 1:1 rockers or our high performance 1.25:1 rockers for added power!

Best when used with EMPI's swivel foot adjusters.

EMPI 21-2310 Rocker Arm Stand Shims, 12 pcs

Designed to go between the rocker stand and the head boss for correct rocker arm height and geometry.

Includes 4pcs., each of .015", .030", and .060"

An easy and inexpensive way to get more power and acceleration from any 1200-1600cc Volkswagen engine.

No special modifications are needed!

Works with stock VW rocker shafts, push rods, and adjusters!

These 1.25 Rocker arms will not affect cam duration; they increase lift throughout the entire cycle.

Does not sacrifice bottom end performance and can be run with stock carburetors.

Set of new screws and new nuts to use for adjusting the valves on a Type 1 VW valve train

Works with our 1.25:1 rocker arms too!

Chromoly rocker studs are superior in strength to stock VW rocker studs

A must have for high-performance heads with dual valve springs!

Installs without modification in Type 1, Type 2, and Type 3 1500-1600cc based heads. Sold in sets of four.

Chromoly rocker studs are superior in strength to stock VW rocker stud

A must have for high-performance heads with dual valve springs!

Installs without modification in Type 1, Type 2, and Type 3 1500-1600cc based heads. Sold each.

ROCKER ARM STAND SHIMS

EMPI 21-2315 Rocker Arm Shims, .015", Set of 4

Designed to go between the rocker stand and the head boss for correct rocker arm height and geometry.

Set of 4

ROCKER ARM STAND SHIMS

EMPI 21-2330 Rocker Arm Shims, .030", Set of 4

Designed to go between the rocker stand and the head boss for correct rocker arm height and geometry.

Set of 4

ROCKER ARM STAND SHIMS

EMPI 21-2360 Rocker Arm Shims, .060", Set of 4

Designed to go between the rocker stand and the head boss for correct rocker arm height and geometry.

Set of 4

EMPI 21-4310 VW High Grade Camshaft Gear Bolts

Cam Vw Bug Set of 3 for attaching P/N 21-2500 aluminum cam gear.

VW .03" CYLINDER HEAD SPACERS

VW steel cylinder head spacers (.030") allow for adjusting deck height easily without removing the cylinders. Compensates for zero deck height when heads have been machined, or in stroker setups. For VW 1500-1600cc engines.

VW .010" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8 mm studs.

Fits VW Type 1 engines.

For 85.5mm cylinders.