Engine Parts

EMPI
Manufacturers
   
Categories
56 Items.  Showing Items 1 thru 48.
 1  2   Next »   Show All 

 EMPI 21-4305 Lube A Lobe Lightweight Lifters

30mm

Sold in Sets of 8

$45.99

22mm Tru-Arc Piston Pin Retainers

Fits all 1300-1600 Type 1 Engines

set of 8

$5.50
$229.00

EMPI 8670 FAN SHROUD 36hp no ducts

$69.99

EMPI 8951 Front Firewall Engine Tin - Early, Black

Fits between engine and transmission

$25.90

EMPI 98-1190-B VW Piston Ring Set 90.5mm (1.5 X 2 X 4mm)

VW PISTON RING SET - 90.5MM

1.5 X 2 X 4mm Ring Size

All rings for 1 engine

 

$29.95

EMPI 16-9519 Main Bearing Dowel Pin Set

This set of 5 dowel pins is used to align the main bearings. Includes five to do a complete install.

Fits all air cooled VW models

 

$3.75

VW PERFORMANCE CRANKSHAFT GEAR SPACER

Gear spacer failure can be a costly event. The stock spacer was never intended to survive the stress of todays high output engines. This performance spacer replaces the stock unit with a solid ring of safety for your gear train.
$9.99

COPPER CYLINDER HEAD GASKETS

Set of four copper head gaskets for 94mm cylinders

Installs between the top of the cylinder and the cylinder head. .060"

$29.95

VW BUG ENGINE NARROW OIL SUMP W/ FILTER

Cast aluminum oil sump is only 1 3/4" deep. Adds oil capacity and offers improved filtration and easy bolt on installation. Filter design allows for unimpeded oil flow even if the filter gets plugged. Stainless steel micron filter can be cleaned and reused.

$139.99

VW BUG ENGINE CASE OIL DUAL BYPASS ADAPTER

This adapter allows you to run both your stock oil cooler, along with an external cooler and/or a remote oil filter.

Fits VW Type 1 with minimal trimming of the sheetmetal. Will not fit doghouse-style coolers.

$49.95

VW OIL SUMP FILTER

Replacement filter for 17-2871 & 17-2872

Offers improved filtration as easy filter design allows for unimpeded oil flow even if the filter gets plugged. Stainless steel micron filter can be cleaned and reused.

$16.49

VW CYLINDER SHIMS

.010" cylinder shims for VW Type 1. 94mm cylinders

These steel shims allow for adjusting the deck height without machining the pistons. Corrects for increase in stroke and compensates when the case is surface machined clearanced for standard 8mm studs.

$8.50
Melling Heavy Duty Oil Pump Type 1 Beetle Flat Cams
$145.00

VW TYPE 1 ALUMINUM HEATER HOSE

Contains no paper. Heat and corrosion resistant to 450 degrees.

Sold Each

$4.49

VW DELUXE ENGINE HARDWARE KIT

You get all the necessary hardware you need to assemble your VW beetle-style engine just the way it rolled off the line! This 10mm set includes case half sealing nuts, 15mm head nuts, and extra thick hardened washers.

$25.95

10MM SELF TAPPING CASE STUD

A quick repair for stripped head studs. The rolled threads of this 10mm stud provide maximum hold and metal chips are effectively collected by the slot or hole design. Hole shown in picture but could have slot.

Measures 9 3/8" (240mm) long.

$9.95

VW ENGINE CHROME & BLUE SHROUD TIN DRESS UP KIT

Kit features all chrome accessories. For VW Type 1 engine.  View the item page for complete item list.

$87.17

VW BLACK FAN SHROUD

Dog house-style VW Bug black fan shroud for no heat ducts

$68.95

VW BLACK FAN SHROUD

Dog house-style VW Bug black fan shroud for with heat ducts

$79.95

VW REPLACEMENT SEAL FOR BOLT-IN

Made for standard size bolt-in pulleys only!

$21.00

VW ENGINE CHROME TIN KIT

Dress your VW engine in chrome with this kit.  For VW Type 1 engine.  View the item page for complete item list.

$14.95

VW ENGINE CHROME TIN KIT

Dress your VW engine in chrome with this kit.  For VW Type 1 engine.  View the item page for complete item list.

$32.50

VW ENGINE SUPER CHROME SHROUD TIN KIT

Dress your VW engine in chrome with this kit.  For VW Type 1 engine.  View the item page for complete item list.

$89.95

Hi Performace C-Channel Bolt-on Valve Covers

Emp 8852 C-Channel Valve Cover Set

Made from investement cast aluminum, with cast in EMPI logo and polished ribs on a black background. 

The finned design helps reduce upper clyinder head temperature and there is enough clearance for most high lift rocker arms. 

It also has a boss that can be drilled for venting to a breathe box. 

The special C-Channel type seals and stud seals insure positive sealing. 

Complete with all gaskets and hardware.

 

$89.95

EMPI 8868 Replacement Channel Gaskets, Pair

For EMPI 8852 Valve Cover Set

$7.99

VW CYLINDER HEAD COOL TIN SET

Black cylinder cool tin set for VW Beetles, Buggys, and Sandrails. Fits most big bore kits.

$17.95

VW CHROME DOGHOUSE FAN SHROUD

Volkswagen Bug chrome no heat ducts

$92.95

VW CHROME DOGHOUSE TIN SET

This 2-piece VW chrome doghouse engine tin set attaches to the back of a doghouse type shroud to direct the hot air coming off the cooler out of the engine compartment. Complete with seals.

$35.95

 

VW CHROME FRONT ENGINE TIN

Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment.

Fits Volkswagen Bug Beetle 1971-1979

 

$22.90

VW CHROME CYLINDER HEAD COOL TIN SET

This VW cylinder cool tin is made of chrome and is a must for any performance application. Fits most big bore kits.

$19.99

VW REAR ENGINE TIN

Engine tin is necessary for maintaining proper engine operating temperatures and seals off exhaust heat from engine compartment. Fits VW Bug, Beetle, Buggy, Ghia.

With fresh air hose holes and without heat riser holes.

$24.95

VW REAR ENGINE TIN

Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. Fits VW Bug, Beetle, Buggy, Sandrails.

Without fresh air hose holes and with heat riser cut outs.

$29.99

VW REAR ENGINE TIN

Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. Fits VW Bug, Beetle, Buggy, Sandrails.

Includes fresh air hose holes and inludes heat riser.

$25.90

VW REAR ENGINE TIN

Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. Fits VW Bug, Beetle, Buggy, Sandrails.

No fresh air hose holes and no heat riser.

$22.95

VW CHROME REAR ENGINE TIN STOCK STYLE

Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. This shroud is also made of chrome, so your VW will not only stay cooler, it will shine!  Fits VW Bug, Beetle, Buggy, Sandrails.

 

$24.99

VW CHROME REAR ENGINE TIN

Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. This shroud is also made of chrome, so your VW will not only stay cooler, it will shine!  Fits VW Bug, Beetle, Buggy, Sandrails.

With fresh air hose holes but no heat riser holes.

$24.99

VW CHROME REAR ENGINE TIN

Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. This shroud is also made of chrome, so your VW will not only stay cooler, it will shine!  Fits Volkswagen Bug, Beetle, Buggy, Sandrail.

Without fresh air hose holes and no heat riser holes.

$24.99

VW CHROME REAR ENGINE TIN

Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. This shroud is also made of chrome, so your VW will not only stay cooler, it will shine!  Fits Volkswagen Bug, Beetle, Buggy, Sandrail.

Without fresh air hose holes and includes heat riser holes.

$29.99

VW CHROME TIN HEATER CHANNEL SET

This snow tin is designed to protect your push rod tubes from snow, ice, salt, rocks, and other debris. Fits VW Type 1, Buggy, and Sandrail.

$38.95

EMPI 8952  Front Engine Tin Black Late Doghouse

Front Engine Tin for Type 1 late model doghouse applications

$25.90

VW STAINLESS STEEL GENERATOR COVER

Stainless steel generator cover for VW Type 1 Beetle, Ghia, & Bus with 12 or 6 volt generators.

$7.95

VW ALTERNATOR/GENERATOR BACKING PLATE KIT

3-piece kit is steel stock style with a chrome finish. Fits Type 1 Volkswagen Bug, Bus, Beetle, Buggy, and Ghia.

$13.95

VW CYLINDER HEAD SHROUDS

Pair of dual port cylinder shrouds for Type 1 Volkswagens. Give your VW a shine with their stamped steel finished in chrome!

$33.95

VW ALTERNATOR/GENERATOR BACKING PLATE

Chrome steel stock style plate fits Bugs, Bus, Beetle, Buggys, Ghias with type 1 engine. Engine tin is necessary for maintaining proper engine operating temperatures. Plate only.

$6.95

EMPI 9119 VW ALTERNATOR/GENERATOR CHROME PULLEY NUT

Chrome cone-shaped spacer and smooth cap-style pulley nut adds the finished look to all stock and chrome pulleys for that detailed "show look." Fits all Volkswagen Type 1 generators and alternators.

$6.95

VW 50MM FAN SHROUD PLUGS

50mm shroud plugs for O.E. Volkswagen shrouds. These zinc-plated caps plug the fresh air outlet tubes on your fan shroud when not in use to prevent the loss of cooling air to the cylinders. Complete with mounting screws.

$5.95

EMPI 9164 VALVE COVER VENTS

Decrease crankcase pressure, eliminate blow-by and reduce oil loss with these easy to install Valve Cover Vents. Features our Sure Seal O-Ring system. Vent into air cleaner or a breather box. Sold as a Pair.

$5.99
56 Items.  Showing Items 1 thru 48.
 1  2   Next »   Show All