Outlaw Street Complete 2276cc Motor

# MFC-CE2276OS
All new case engines are currently at a minimum of 24 weeks lead time. Rebuilt case engines are currently at a minimum of 16 weeks lead time. We are a family owned, performance, custom-build shop... and quality takes time. Buy with confidence directly from the engine builder. Mofoco has over 55 years of experience in the VW industry building aircooled VW engines.
Outlaw Street Complete 2276cc Motor

This is the Complete version of our most popular stroker motor configuration. The 2276cc Outlaw Street Motor built by Mofoco to be the best street performance motor you can buy. It delivers the horsepower you are looking for, but still has the reliability you need. This motor is built with all new components and features Mofoco's exclusive 050 heads with D-shaped intake ports and is also the only VW aircooled cylinder head completely manufactured in the USA.All motors are priced with no exhaust so you can choose the option that best fits your needs


  • New Magnesium Engine Case
  • New 82mm 4340 Chromoly Counterweighted Crankshaft
  • New 94mm Pistons & Barrels
  • New Chromoly I-Beam Rods
  • New Lifters
  • New Engle W120 Performance Cam
  • New Mofoco "050" cylinder heads D - Shaped intake port; made purely in USA!
  • New Dual Weber 44 Carburetors
  • 12LB Forged Lightened Flywheel - 8 Dowelled
  • New Solid Rocker Shafts
  • New Stock Doghouse Fan Shroud
  • New Doghouse Oil Cooler
  • New Alternator
  • New Filter Pump with spin on oil filter
  • New 009 Distributor
  • New Fuel Pump
  • Test run and tuned before leaving our facility
  • All engines come with a 12 month warranty.

All Motors are Test Run at our facility before going out the door. With a complete, its the best way to go because we do all the initial work and all you have to do is the install. We run the motor for one to two hours and check anything and everything possible. We check the valves 2-3 times, we set the timing, adjust and sync the carbs, check the compression, check the oil pressure, and  the initial break-in on the cam is done.

Every motor is personally checked to make sure you have no problems upon installation.

Price: $7799.00
Heater Box Option
This option is to add either Dansk Heater Boxes or J-Tubes to your motor.
Dansk Heater Boxes  $400.00
J-Tubes  $25.00
No Exhaust 
Ceramic Coated Flanged J-Tubes  $127.00
Muffler Options
Choose the muffler that best fits your application. Call or email if you have questions what is right for you.
Single Quiet Pack  $149.00
EMPI 3459 Trymill Chrome 1 5/8"  $199.00
1 5/8" Merged Header/Phat Boy Muffler 3699/3701 NO HEAT  $275.00
1 5/8" Merged Header/Phat Boy Muffler 7320/3701 WITH HEAT  $275.00
Try Mill Made in USA- Two Tip Muffler  $225.00
EMPI - Phat Boy Header Muffler, Ceramic55-7320/3702  $548.00
Please choose fan shroud*
With heat ducts 
Without heat ducts 
Powder Coat Sheet Metal
Powder Coat  $350.00
MST Serpentine Belt System
Serp Belt System  $249.00
Hydraulic Kit
Hydraulic Lifters, Cam & Push Rods  $249.00
90 AMP Alternator (Chrome)
90 AMP alternator  $175.00
Port & Polish Heads
Port & Polish Heads  $250.00
Dual Weber 48 IDA's
Genuine Weber 48 IDA's  $750.00
Upgrade Cam with 1.4's
Cam with 1.4 Rockers  $350.00
1.25 Ratio Rockers Upgrade
1.25 Ratio Rockers  $99.99
Mahle Forged PIstons  $300.00
Chrome Package

This option will give your motor the chrome look you are looking for. Chrome package changes all black sheetmetal to chrome.

Chrome Package Upgrade  $150.00
Standard Black Sheetmetal 
Performance Clutch

The performance clutch option includes a Kennedy 1700LB pressure plate, stock solid clutch disc and throwout bearing.

Stage 1 Performance Clutch Kit Early  $199.00
Stage 1 Performance Clutch Kit Late  $199.00
Electronic Ignition

Never set points again. This electronic ignition module kit replaces the points and the condensor. Electronic ignition offers more reliable and faster starting.

Electronic Ignition Points Replacement  $70.00