TYPE 4 CRANK PULLEY SEALS

Stock Pulley Seal, 1.9-2.1L Vanagon Engines

VW 200MM FLYWHEEL

Here we have a brand new 200MM 12 volt, 130 tooth 4 dowel flywheel.

This a cast steel flywheel with a brand new replacable steel ring gear.

VW 200MM FLYWHEEL

Here we have a brand new 200MM 12V, 130 tooth, 8 dowel flywheel. This a cast steel flywheel with a brand new replacable steel ring gear. This is a good choice for moderate horsepower applications.

111-105-277 Volkswagen Crankshaft Dowel Pin 36hp

VW CRANKSHAFT DOWEL PIN

This flywheel to crankshaft dowel pin fits all air cooled Volkswagens 1961-1979 with 1200-1600cc engines.

OE German Recycled. Sold each.

VW FLYWHEEL O-RING SEAL

For 1700CC-2000CC engines. Bus 72-79 & Vanagon 80-83.

VW METAL FLYWHEEL GASKET

Metal flywheel gasket for all Volkswagen 1500 & 1600cc non- o-ring flywheels; 4 dowel

VW FLYWHEEL O-RING SEAL

Sealing "O" ring for the flywheel; manual and automatic.

Fits 1965-1979 Volkswagens with 1300-1600cc engines.

VW GLAND NUT

Volkswagen Type 1 Gland Nut, not for automatics

NEEDLE BEARING GLAND NUT

Needle bearing gland nut for Volkswagen Type 1, non-automatic

VW STOCK CONNECTING RODS

Set of four stock connecting rods made of superior forged (not cast) material!

Small end bushing bored (not honed) to finished size with the latest manufacturing techniques.

These Type 1 Connecting Rods are BRAND NEW, not rebuilt!

Fits all Type 1 VW engines.

A real bargain and a great upgrade!

VW CONNECTING ROD BUSHING

Connecting Rod Bushing that fits Volkswagen Type 2 & 4 1700cc-2000cc.

039-105-701 Standard Size Connecting Rod Bearing

Type 2 Bus with 2000cc engine

Standard Rod Bearing 1961-1979 113-105-701

021-105-701A Standard Size Connecting Rod Bearing 1700cc-1800cc Type 2 Bus Motors

Brand New Stock Replacement FLAT Cam for 1970 and older 1600cc VW Beetle Based Engines

Brand New Stock Replacement Dish Cam for 1971-1979 1600cc VW Beetle Based Engines

4 Rivet Cam Gear Included!

VW Push Rod

For all 1300CC-1600CC Beetle Style Engines

VW PUSH ROD

Reclaimed Original Good Used German Volkswagen Push Rods for Type 1 motors

VW CAM FOLLOWER / LIFTER

SOLID LIFTER

1700CC-2000CC - BUS 72-77

021-109-309X Reground solid Volkswagen lifter;

Type 2 and 4

1700 & 1800cc

VW PUSH ROD TUBE

Volkswagen 36hp push rod tube.

When rebuilding engines, installing new push rod tubes is essential.

VW PUSH ROD TUBE

Volkswagen 40hp push rod tube.

When rebuilding engines, installing new push rod tubes is essential.

VW PUSH ROD TUBE

This push rod tube fits all 1600cc Volkswagen motors; does not fit 40hp or 1200cc motors.

VW PUSH ROD TUBE

Push rod tube for Volkswagen Bus 1700, 1800, 2000cc

VW PUSH ROD TUBE

Volkswagen plastic push rod tube with spring

VW SEALING WASHER

21.3mm sealing washer for Volkswagen push rod tubes.

For 1700-2000cc VW engines

VW PUSH ROD TUBE SEAL

Push rod tube seals must be replaced after removing cylinder heads from the engine.

For Volkswagen 40hp 1200-1600CC

(Also Vanagon 83-92 Outer Seal)

VW SEALING WASHER

25.5mm sealing washer for Volkswagen push rod tubes.

For VW Bus 1700-2000cc

VOLKSWAGEN VALVE ADJUSTING SCREW - 10MM

1700-2000CC BUS 72-79 STYLE ENGINES

Sold Each

VOLKSWAGEN VALVE ADJUSTING SCREW - 8MM

FOR 1200-1600CC AIR COOLED VOLKSWAGEN ENGINES

Sold Each

VW HEAVY DUTY OIL PUMP

Small Passage Oil Pump with 26mm gears (original was 21mm) for Volkswagen 1969 and earlier Type 1 WITH 6MM OIL PUMP STUDS. Use with flat gear cams (3 bolt gear).

O.E. GERMAN RECYCLED

VW LARGE PASSAGE OIL PUMP

Large passage Oil pump with 21mm gears for Volkswagen Type 1 with a flat cam (3 bolt gear); 8mm mounting holes

VW SCHADEK SMALL PASSAGE OIL PUMP

Small passage Volkswagen Type 1 oil pump with 8mm holes; for 1500-1600cc 1967-1969 models.

VW LARGE PASSAGE OIL PUMP

Large passage Oil pump with 26mm gears for Volkswagen Type 1 with a dish cam (4 bolt gear); 8mm mounting holes

VW OIL PUMP GASKET

8mm oil pump to cover Volkswagen engine gasket

VW OIL PUMP GASKET

6mm oil pump to cover gasket; use with Volkswagen oil pump 311-115-107K

VW OIL PUMP GASKET

8mm oil pump to cover gasket; use with oil pumps 111-115-107AK or 311-115-107AK.

VW OIL PUMP COVER PLATE

Volkswagen Type 1 oil pump cover plate with O.E with 6mm holes.

VW BUS OIL PUMP

Fits all 1700/1800/2000

O.E. GERMAN RECYCLED

VW OIL STRAINER SCREEN

For 1200CC-1500CC VW Engines made through 1967

VW OIL STRAINER SCREEN

For 1500CC-1600CC VW Engines from 68-69

VW OIL STRAINER SCREEN

For 1500CC-1600CC VW Engines made after '69

OIL STRAINER COVER PLATE

Oil strainer cover plate with drain hole for Volkswagen Bug, Bus, Ghia

Fits 1200cc-1600cc engines

25HP & 36 HORSE VW OILSTRAINER COVER PLATE

Covers the oil strainer on a 25hp or 36hp air cooled VW

WITH DRAIN PLUG HOLE

This strainer plate is for 25HP & 36HP Volkswagens

VW OIL DRAIN PLUG

For 25 & 36hp Volkswagens