CheckOut

Street Performance - Series I (90.5mm Bore) BE1776

# MFC-BE1776
 Mofoco
At Mofoco, all of our engines, transmissions, and heads are built to order! Because of this, there are typical wait times of two days, to four weeks. Please call us at 1-800-558-8955 to discuss the wait times or ask any questions at the time of your order.
Street Performance - Series I (90.5mm Bore) BE1776

Street Performance - Series I.  A popular choice if you're looking to step up from a stock displacement engine.  Offers the same reliability as stock but gives you additional performance.

Features:

  • New engine case
  • STD/STD German crankshaft
  • Big bore pistons & barrels
  • New connecting rods
  • All new bearings
  • Reground german lifters
  • New performance cams
  • High volume oil pump
  • Mofoco 041 heads (39mm x 32mm heads)
  • New stock flywheel
  • Silicone rear main seal
  • Reconditioned German rocker arms
  • Balanced
  • Hot test run before shipping
  • 12 month warranty
Price: $1699.00
Crankshaft Choice*
Upgrade the stock crankshaft to a Scat 69mm counterweighted crankshaft. Designed to improve balance in the motor, reduce wear on the case, and extend the life of your motor.
Standard Crankshaft 
Scat 69mm Counterweighted Crankshaft  $120.00
Flywheel Choice*
Add a lightened flywheel to your motor to improve acceleration at the line. Not Recommended for Bus applications
Standard Flywheel 
12lb Lightened Flywheel  $60.00
Push Rod Choice*
Upgrade the stock push rods to chromoly push rods
Standard Push Rods 
Chromoly Push Rods  $25.00
Rocker Shafts Choice*
Upgrade to solid rocker shafts to reduce valve train noise.
Standard Rocker Shafts 
Solid Rocker Shafts  $95.00
Filter Pump Upgrade
Extend the life of your motor by adding on a filter oil pump with spin on filter.
Spin on filter pump  $70.00
Deep oil sump
This increases the motors oil capacity by 1.5 quarts by adding a deep sump onto the bottom of the case.
1.5QT deep sump  $90.00
042 Heads Upgrade
Upgrade the heads on the motor to Mofoco's 042 Cylinder Heads with 40mm intake and 35.5 exhaust stainless steel valves
Auto Stick Options
When you are installing a motor with an auto-stick transmission, you will need the correct oil pump and flex plate. This will insure you have no problems when doing the install.
Auto Stick oilpump & flexplate  $175.00
Quantity: