Mofoco New Single Port 1600cc RACE

# MFC-NE151
 Mofoco
All new case engines are currently at a minimum of eight weeks lead time. Rebuilt case engines are currently at a minimum of 10-12 weeks lead time. We are a family owned, performance, custom-build shop... and quality takes time. Mofoco is one of the slowest because Mofoco is the one of the best. Buy with confidence directly from the engine builder. Mofoco has almost 50 years of experience in the VW industry building aircooled VW engines. How many other companies allow you to speak with the person building your engine?
Mofoco New Single Port 1600cc RACE

 

 

The longblock consists of the basic bottom end of a VW Aircooled motor. It consists of a VW block, piston & cylinders, cylinder heads along with a flywheel and oil pump and everything in between. This is considered the more technical part of the motor and it is tougher to machine and assemble for the at home "Do It Yourself-ers". So we take care of the bottom end and you take care of the top end. You will responsible for swapping your sheetmetal, intake, exhaust, carb, distributor, coil, wires on to this bottom end that we provide you.

All of our longblocks are Hot Test Run meaning we actually put our own top end equipment on there so we can run your motor and not just "bench" test it. We do this to ensure the motor is running perfectly before we send it out to you. We adjust the valves numerous times, check the oil pressure, check for any leaks, check compression and do the basic break in for you before you receive. This is how we ensure that the motor is 100% perfect before we send it out and we know that you will have zero problems. On top of that, we even put a 12 month warranty to go with it.

Buy with Confidence! We have been building VW Aircooled motors since 1970.

Engine Specifications & Components

  • New AS41 Dual Relief Engine Case & Hardware
  • Reground Forged German crankshaft - better than a new Brazilian cast crank
  • Rebuilt German Connecting Rods
  • All New Mahle Main, Rod & Cam Bearings
  • Performance Cam
  • 10.5lb lite flywheel
  • All New Gaskets & Seals (Elring - German)
  • New Full Flow Oil Pump system
  • New Valve Covers
  • New 85.5 Pistons & Barrels
  • New SINGLE Port Heads---Port and Polished
  • Hot test run before leaving our facility

 

Price: $2999.00
Counterweighted Crankshaft
69mm Counterweight Crankshaft  $160.00
Filter Pump
  $70.00
Hydraulic Lifters
Lifters, Push Rods & Hydraulic Camshaft  $199.00
Lightened Flywheel
  $60.00
Solid Rockershafts
  $95.00
Clutch Kit - Disc, Pressure Plate, Throwout Bearing
Early Kit (Pre 1969)  $99.00
Late Kit (1970 Later)  $99.00
Auto Stick Oilpump and Flexplate

When you are installing a motor with an auto-stick transmission, you will need the correct oil pump and flex plate. This will insure you have no problems when doing the install.

Auto Stick Oilpump and Flexplate  $175.00
Quantity: