VW .03" CYLINDER HEAD SPACERS

VW steel cylinder head spacers (.030") allow for adjusting deck height easily without removing the cylinders. Compensates for zero deck height when heads have been machined, or in stroker setups. For VW 1500-1600cc engines.

VW 90.5MM PISTON PIN BUTTON SET

Prevent costly engine damage with these VW 90.5mm teflon piston pin retainer buttons. The failure of the small and fragile stock clips that are easily damaged during installation can cause total engine destruction. Teflon retainers are easy to install and will not break or wear out. Easy press-in installation.

VW 92MM PISTON PIN BUTTON SET

Prevent costly engine damage with these VW 92mm teflon piston pin retainer buttons. The failure of the small and fragile stock clips that are easily damaged during installation can cause total engine destruction. Teflon retainers are easy to install and will not break or wear out. Easy press-in installation.

VW 94MM PISTON PIN BUTTON SET

Prevent costly engine damage with these VW 94mm teflon piston pin retainer buttons. The failure of the small and fragile stock clips that are easily damaged during installation can cause total engine destruction. Teflon retainers are easy to install and will not break or wear out. Easy press-in installation.

VW .02" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 & 92mm cylinders.

 VW .01" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 & 92mm cylinders. For VW Type 1 engines.

 VW .03" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 & 92mm cylinders.

 VW .04" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 & 92mm cylinders.

VW .06" CYLINDER HEAD SPACERS

VW steel cylinder head spacers (.060") allow for adjusting deck height easily without removing the cylinders. Compensates for zero deck height when heads have been machined, or in stroker setups. For VW 1500-1600cc engines.

 VW .060" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 and 92mm bore VWs.

 VW .03" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 94mm bore VWs.

 VW .06" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 94mm bore VWs.

VW .09" CYLINDER SHIM SET

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 94mm bore VWs.

VW .04" CYLINDER HEAD SPACERS

VW steel cylinder head spacers (.040") allow for adjusting deck height easily without removing the cylinders. Compensates for zero deck height when heads have been machined, or in stroker setups. Set of 4.

VW .01" CYLINDER SHIM SET 

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8 mm studs. Fits VW Type 1 engines. For 85.5mm cylinders.

VW .02" CYLINDER SHIM SET 

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8 mm studs. Fits VW Type 1 engines. For 85.5mm cylinders.

VW .03" CYLINDER SHIM SET 

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8 mm studs. Fits VW Type 1 engines. For 85.5mm cylinders.

VW .04" CYLINDER SHIM SET 

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8 mm studs. Fits VW Type 1 engines. For 85.5mm cylinders.

VW .09" CYLINDER SHIM SET 

Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8 mm studs. Fits VW Type 1 engines. For 85.5mm cylinders.

EMPI 98-1190-B VW Piston Ring Set 90.5mm (1.5 X 2 X 4mm)

VW PISTON RING SET - 90.5MM

1.5 X 2 X 4mm Ring Size

All rings for 1 engine

VW 85.5MM PISTON & BARREL SET 

85.5mm piston & barrel set for Volkswagen Type 1 & 3

VW 85.5MM PISTON & BARREL SET (MAHLE)

85.5mm piston & barrel set for Volkswagen Type 1 & 3

VW 2000cc PISTON & BARREL SET

94mm 2000cc piston & barrel set for Volkswagen Type 2 & 4

VW 1800cc PISTON & BARREL SET

93mm 1800cc piston & barrel set for Volkswagen Type 2 & 4

VW 1700cc PISTON & BARREL SET

90mm 1700cc piston & barrel set for Volkswagen Type 2 & 4

VW 87MM PISTON & BARREL SET 

87mm piston & barrel set for Volkswagen Type 1 & 3

VW 87MM PISTON & BARREL SET (MAHLE) SPECIAL ORDER ONLY SHIPS IN 5-7 BUSINESS DAYS

87mm piston & barrel set for Volkswagen Type 1 & 3

VW 92MM PISTON & BARREL SET

92mm big bore piston & barrel set for Volkswagen Type 1 & 3

VW 92MM PISTON & BARREL SET (MAHLE) SPECIAL ORDER ONLY SHIPS IN 5-7 BUSINESS DAYS

92mm piston & barrel set for Volkswagen Type 1 & 3

VW 92MM STROKER PISTON & BARREL SET (MAHLE) SPECIAL ORDER ONLY SHIPS IN 5-7 BUSINESS DAYS

92mm stroker piston & barrel set for Volkswagen Type 1 & 3

VW 94MM PISTON & BARREL SET

94mm big bore piston & barrel set for Volkswagen Type 1 & 3

VW 94MM PISTON & BARREL SET

94mm Big Bore STROKER Piston & Barrel set for Volkswagen Type 1 & 3

Complete with piston rings

VW 94MM PISTON & BARREL SET (MAHLE) SPECIAL ORDER ONLY SHIPS IN 5-7 BUSINESS DAYS

94mm piston & barrel set for Volkswagen Type 1 & 3

VW 94MM STROKER PISTON & BARREL SET (MAHLE) SPECIAL ORDER ONLY SHIPS IN 5-7 BUSINESS DAYS

94mm stroker piston & barrel set for Volkswagen Type 1 & 3

VW PISTON RING COMPLETE SET - 94MM

1.75x2x3.5MM Ring Size

All rings for one engine

For Vanagon 86-92 2.1L

 VW PISTON RING COMPLETE SET - 83MM 

2x2x4MM Ring Size

All rings for one engine

For Beetle/Ghia 67-69

  VW PISTON RING COMPLETE SET - 85.5MM

2x2x5MM Ring Size

All rings for one engine

For Beetle/Ghia/Type 3 70-79

  VW PISTON RING COMPLETE SET - 90MM

All rings for one engine

For VW Bus 72-73, 1700CC

  VW PISTON RING COMPLETE SET - 94MM 

1.75x2x4MM Ring Size

All rings for one engine

For VW Bus 68-79 2.0L & Vanagon 83-85 1.9L

Make sure to measure piston ring gland sizes before ordering.

VW PISTON RING COMPLETE SET - 93MM 

All rings for one engine

For VW Bus 74-75, 1800CC

VW 90.5MM PISTON & BARREL SET

90.5mm big bore piston & barrel set for Volkswagen Type 1 & 3 for 69mm crank.

VW 90.5MM PISTON & BARREL SET (MAHLE) SPECIAL ORDER ONLY SHIPS IN 5-7 BUSINESS DAYS

90.5mm piston & barrel set for Volkswagen Type 1 & 3