|
Steel spacers allow for increasing the deck height without removing the cylinders. Compensates for zero deck height when heads have been machined or in stroker applications. Set of 4.
$9.99
|
Steel shims for increasing deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined. Fits 94mm bore VWs.
$7.99
|
Steel shims for increasing deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined. Fits 85.5 and 87mm bore VWs.
$7.99
|
|
Steel shims for increasing deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined. Fits 90.5 and 92mm bore VWs.
$7.99
|
Steel shims for increasing deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined. Fits 94mm bore VWs.
$7.99
|
Steel shims for increasing deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined. Fits 94mm bore VWs.
$7.99
|
|
The ultimate alternator/generator strap. The great and long lasting looks, strength, and durability of stainless steel with the positive security of the t-bolt style. A must for off roading.
$5.99
|
Increase the RPM potential of your VW engine and get more power. EMPI's high-strength Rocker Shaft Kit helps eliminate rocker shaft side play that causes rocker arm galling and clip & washer failure.
$49.95
|
An easy and inexpensive way to get more power and acceleration from any 1200-1600cc VW engine. No special modifications are needed the 1.25's work with stock rocker shafts, push rods, and adjusters!
$89.95
|
|
Never install a new camshaft without new cam followers. Get longer life from your VW engine with our performance cam followers. Manufactured to exacting tolerances and Maganese Phosphate coated.
$29.95
|
VW 31mm surface contact lifters have 15% more contact than stock lifters to reduce scuffing and early lobe wear. Made from one-piece billets and precision ground.
$59.90
|
VW high grade cam bolts for attaching our P/N 21-2500 cam gear.
$2.99
|
|
VW steel cylinder head spacers (.030") allow for adjusting deck height easily without removing the cylinders. Compensates for zero deck height when heads have been machined, or in stroker setups. 1500-1600cc.
$9.25
|
VW steel cylinder head spacers (.060") allow for adjusting deck height easily without removing the cylinders. Compensates for zero deck height when heads have been machined, or in stroker setups. 1500-1600cc.
$9.25
|
Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 & 92mm cylinders.
$7.99
|
|
Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 & 92mm cylinders.
$7.99
|
Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 & 92mm cylinders.
$7.99
|
Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 & 92mm cylinders.
$7.99
|
|
Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 & 92mm cylinders.
$7.99
|
Basic VW carburetor repair kits come with accelerator pump diaphram, needle/seat and all necessary o-rings & gaskets.
$29.00
|
Small intake boot clamps for Type 1 Volkswagen dual port engines. Sold in pairs.
$2.49
|
|
A pair of VW large intake manifold boot clamps.
$2.49
|
A pair of VW intake manifold gaskets fits Type 2 & Type 4 engines; 1700-2000cc. 3 & 4 bolt gaskets.
$2.99
|
A VW carburetor base gasket for Weber Carburetors; 40/44/48 IDA Gasket
$1.99
|
|
Repair stripped and worn head stud threads with these VW case saver inserts. Provides a great hold and comes in sets of 8.
$7.99
|
You get all the necessary hardware you need to assemble your VW engine just the way it rolled off the line! 8mm set. Includes case half sealing nuts, 15mm head nuts, and extra thick hardened washers.
$23.90
|
You get all the necessary hardware you need to assemble your VW engine just the way it rolled off the line! 10mm set. Includes case half sealing nuts, 15mm head nuts, and extra thick hardened washers.
$24.99
|
|
These VW hi-performance pushrods resist flexing at high RPM's under loads of high lift cams and heavy valve spring pressures. A must with any dual spring application. Made from the highest quality heat treated 5/16" steel tubing, ends are pre installed and pushrods are 11.078" overall length! Set of 8 rods.
$34.45
|
Chromoly push rods are lighter and stronger than regular VW steel push rods. The 3/8" tubing offers maximum strength to maintain no flex operation at higher RPMs under the stress of high lift cams and high-rev. valve springs.
$54.95
|
These VW high-rev valve springs fit air cooled Type 1 1200cc, 1600cc & larger engines. Prevent engine damage due to valve float or worn and weak valve springs. Made from special silicone spring steel for high RPM applications.
$21.50
|
|
Prevent engine damage due to valve float or worn and weak valve spings. For high RPM applications, our dual valve springs offer improved control and reliability.
$39.00
|
Precision fit and heat-treated VW valve locks prevent valve groove wear and failure. Compatible with stock VW and stainless steel valves, as well as with all stock retainers. Pair of 8.
$4.90
|
Set of 8 VW .030" rocker shaft arms. Replace the wave washers on the stock rocker shafter set-up. Eliminates excess side play and maintains proper valve train geometry.
$4.49
|
|
Set of 8 VW .060" rocker shaft arms. Replace the wave washers on the stock rocker shafter set-up. Eliminates excess side play and maintains proper valve train geometry.
$4.49
|
Prevent costly engine damage with these VW 92mm teflon piston pin retainer buttons. The failure of the small and fragile stock clips that are easily damaged during installation can cause total engine destruction. Teflon retainers are easy to install and will not break or wear out. Easy press-in installation.
$14.80
|
Prevent costly engine damage with these VW 94mm teflon piston pin retainer buttons. The failure of the small and fragile stock clips that are easily damaged during installation can cause total engine destruction. Teflon retainers are easy to install and will not break or wear out. Easy press-in installation.
$15.99
|
|
This kit has everything you need to install a crankshaft into a 1200-1600cc VW engine.
$78.00
|
These stainless steel push rod tubes w/o seals are the ultimate in strength and good looks for your VW! No rust or corrosion to deal with because these are stainless steel. Fits all 1300-1600cc; set of 8.
$34.00
|
Get your oil under control! These performance windage push rod tubes extend further into the case to prevent oil from over filling the valve coves during cornering or hard race use. Set of 8.
$38.00
|
|
Dress up your VW engine with this Red Super Chome & Color-Deluxe Engine Kit! Kit features all chrome accessories. View the item page for complete item list.
$94.99
|
Dress up your VW engine with this Blue Super Chome & Color-Deluxe Engine Kit! Kit features all chrome accessories. View the item page for complete item list.
$94.99
|
PULLEY SPACER SET; .090" thickness
$9.00
|
|
Increase horsepower thru precision timing and valve settings with this bolt-on Volkswagen high grade polished aluminum degree crankshaft power pulley! Includes high quality belt.
$54.95
|
VW replacement seal for both bolt-in and machine-in standard size sand seal pulleys.
$9.00
|
VW replacement seal & collar for bolt-in standard size pulleys. For bolt-in pulleys only!
$21.00
|
|
VW sand seal polished aluminum power pulley kit featuring machine case version with 5 hole design. Full 360-degree markings in black. Includes seal.
$41.50
|
Dress your VW engine in chrome with this kit!
$24.50
|
Dress your VW engine in chrome with this kit!
$32.50
|
|
Dress your Volkswagen engine in chrome with this super kit!
$58.99
|
Increase horsepower with precision timing and valve settings with this High grade polished aluminum VW standard size crankshaft pulley that fits all Type 1s. Full 360 degree timing marks, screened on with a special process for longetivity.
$24.00
|
Increase horsepower thru precision timing and valve settings with this Volkswagen high grade polished aluminum degree crankshaft power pulley! Includes high quality belt.
$28.75
|
|
Increase horsepower with precision timing and valve settings with this High grade polished aluminum VW standard size crankshaft pulley that fits all Type 1s. Full 360 degree timing marks, screened on with a special process for longetivity.
$24.00
|
Volkswagon chrme magnetic drain plug. Helps keep your oil free from metal bits and shavings. Includes sealing washer.
$3.99
|
Black cylinder cool tin set for VW Beetles, Buggys, and Sandrails. Fits most big bore kits.
$17.49
|
|
2 piece VW black doghouse tin set attaches to the back of a dog house type shroud to direct the hot air coming off the cooler out of the engine compartment. Complete with seals.
$24.80
|
Volkswagen Bug chrome 36hp dog house style fan shroud; no heat ducts
$69.95
|
Volkswagen Bug chrome 36hp dog house style fan shroud; with heat ducts
$69.95
|
|
Volkswagen Bug chrome 36hp dog house style fan shroud; with heat ducts
$69.95
|
2 piece VW chrome dog house engine tin set attaches to the back of a dog house type shroud to direct the hot air coming off the cooler out of the engine compartment. Complete with seals.
$27.30
|
2 chrome valve covers with bales. Fits 1961 and newer VW Bug, Karmann, Ghia, Type 3, Thing, and Bus (up to 1971.)
$14.99
|
|
Use on late style & Type 3 cases to block off oil fill opening to convert to upright applications. Complete with cast aluminum block-off plate and gasket.
$3.99
|
This VW cylinder cool tin is made of chrome and is a must for any performance application. Fits most big bore kits.
$19.99
|
Brand new engine pulley tin for all Type 1 Volkswagens; black in color. Plate only, no hardware.
$8.80
|
|
Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. Fits VW Bug, Beetle, Buggy, Ghia; with fresh air hose holes and without heat riser holes.
$21.99
|
Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. Fits VW Bug, Beetle, Buggy, Sandrails; without fresh air hose holes and inludes heat riser.
$19.99
|
Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. Fits VW Bug, Beetle, Buggy, Sandrails; includes fresh air hose holes and inludes heat riser.
$19.99
|
|
Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. Fits VW Bug, Beetle, Buggy, Sandrails; no fresh air hose holes and no heat riser.
$19.99
|
Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. This shroud is also made of chrome, so your VW will not only stay cooler, it will shine!
$21.99
|
Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. This shroud is also made of chrome, so your VW will not only stay cooler, it will shine!
$24.99
|
|
Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. This shroud is also made of chrome, so your VW will not only stay cooler, it will shine!
$21.99
|
Engine tin is necessary for maintaining proper engine operating temperatures, and seals off exhaust heat from engine compartment. This shroud is also made of chrome, so your VW will not only stay cooler, it will shine!
$21.99
|
This 3 piece black VW heater channel tin kit is the finishing touch to control engine heat! Fits between heater boxes and engine case.
$35.90
|
|
This heater channel kit is made of chrome and designed to protect your push rod tubes from snow, ice, salt, rocks, and other debris. Fits VW Type 1, Buggy, and Sandrail.
$34.95
|
Dress up your Volkswagen engine by replacing stock Volkswagen or "stock style" oil fillers with this chrome one!
$8.75
|
Dual port cylinder shrouds for Type 1 Volkswagens. Stamped steel finished in gloss black.
$28.49
|
|
Stainless steel generator cover for VW Type 1 Beetle, Ghia, & Bus with 12 or 6 volt generators.
$7.99
|
VW alternator/generator backing plate kit; steel stock style with a chrome finish. 3 piece kit, fits Type 1 Volkswagen Bug, Bus, Beetle, Buggy, and Ghia.
$12.50
|
Dual port cylinder shrouds for Type 1 Volkswagens. Give your VW a shine with thier stamped steel finished in chrome!
$29.99
|
|
Volkswagen replacement O-ring seals for bolt-on valve covers; set of 4.
$2.50
|
Volkswagen fuel pump block-off with threaded breather boss
$3.99
|
Heavy duty spring keeps a constant tension for a positive seal. The spring loaded design also allows you to quickly change damaged or leaking push rod tubes, without removing the engine!
$66.80
|
|
Features full 360-degree timing marks, screened on with a special process for longevity; 5 hole-design with black numbers. Adds that high performance look to any VW engine!
$29.00
|
Our chrome finished pulley bolt and washer adds the finishing touch to all crank pulley installations. Fits any stock or custom pulley.
$4.99
|
Our chrome finished pulley bolt and washer adds the finishing touch to all crank pulley installations. Extra long bolt must be used with bolt-in sand seal pulleys.
$5.25
|
|
New chrome pulley & belt guard with hardware for VW Baja, Buggy, Sandrail, Trike, etc. Fits all upright Volkswagen motors.
$19.95
|
Volkswagen aluminum valve covers that are cast and polished aluminum, with cooling fins to increase heat dissipation.
$24.99
|
Change a damaged or leaking push rod tube without removing the engine or heads. Great for emergency repairs or permanent installation. Made of heavy duty aluminum & comes with seals.
$9.50
|
|
50mm Fan shroud plugs for O.E. Volkswagen shrouds. Zinc plated caps plug the fresh air outlet tubes on your fan shroud when not in use, to prevent the loss of cooling air to the cylinders. Complete with mounting screws.
$2.99
|
Volkswagen bolt on aluminum valve covers for Type 1 VW engines. Includes 2 covers, 2 gaskets, & all necessary hardware.
$21.99
|
Volkswagen Beetle Bug chrome 12volt alternator or generator pulley
$10.99
|
|
Aluminum stock style Volkswagen alternator or generator stand for VW Bug, Buggy, Trike, Thing, Ghia, or Bus. Can also be used with 12volt conversions or upgrading from generator to alternator.
$15.99
|
VW chrome air intake screen prevents debris from entering the fan. A must for all off-road applications or when engine compartment is subject to external debris.
$7.99
|
High temperature VW oil hose for use with oil coolers and/or remote oil filter. 5' length, 3/8" I.D.
$9.79
|
|
Full engine gasket set for 1972-78 Volkswagen Bus, Vanagon, & Transporter with a 2.0 liter engine.
$66.50
|
|
|
