# N145251  M10 - 1.50 x 85mm

8MM STUD HARDWARE KIT (Nuts & Washers)

This 8mm set includes 16 Stud nuts, washers.

M8x1.25x35MM Allen Head Screw

8mm nut size

1.25 thread pitch

35mm length

10mm cylinder head nut for air cooled VWs with 10mm head studs

Sold each

RECYCLED OEM

10MM DUAL PORT CYLINDER HEAD CENTER STUD

Brand New. 7.25 inches overall length.

111-301-207 Gearshift Housing Bushing, Ea.

For Swingaxle Transmissions, Type 1, 2, and 3

Genuine VW Connecting Rod Nut

VWP 113-105-427 Air-cooled connecting rod nut, each

Type 1 Rod Nut

113-141-711A

Thin Bushing for 20mm Clutch Crossshaft

113-198-033 Engine Case Hardware Kit

This kit includes the oil relief pistions, springs, studs, cover plates, etc., to make a new engine case complete

M 8 - 1.25 x 35mm Hex Cap Screw, Class 8.8 Zinc. DIN 933 / ISO 4017

Specifications:

Diameter: M8

Thread Pitch: 1.25

Length: 35mm

Head Height: 5.3mm

Head Width: 13mm

Thread Length: Full Thread

M 8 Flat Washer, Steel Zinc. DIN 125A / ISO 7089

EMPI 16-9904 Bolt on Bowden Tube Bracket

Used for both Bowden tube and hydraulic clutch slave cylinders

131-405-323 Nut, Hex M 10x1 Self Locking, Ea.

Steering Damper Self Locking Nut for Type 1-4

8MM DUAL PORT CYLINDER HEAD CENTER STUD

Brand New. 7.25 inches overall length.

M 8 - 1.25 x 50mm Hex Cap Screw, Class 8.8 Zinc. DIN 933 / ISO 4017

M 8 - 1.25 x 60mm Hex Cap Screw, Class 8.8 Zinc. DIN 933 / ISO 4017M 8 - 1.25 x 60mm Hex Cap Screw, Class 8.8 Zinc. DIN 933 / ISO 4017

M 7 - 1.0 Hex Nut, Class 8 Zinc. DIN 934

N144438 M 8 - 1.25 x 35mm Full Threaded Studs, Steel Zinc. DIN 976-1

N144003 M 8 - 1.25 x 38mm Full Threaded Studs, Steel Zinc. DIN 976-1

9768108040 M 8 - 1.25 x 40mm Threaded Pin/Full Thread Stud Bolts Steel Zinc. DIN 976-1

VW DELUXE ENGINE HARDWARE KIT

You get all the necessary hardware you need to assemble your VW beetle-style engine just the way it rolled off the line! This 10mm set includes case half sealing nuts, 15mm head nuts, and extra thick hardened washers.

10MM SELF TAPPING CASE STUD

A quick repair for stripped head studs. The rolled threads of this 10mm stud provide maximum hold and metal chips are effectively collected by the slot or hole design. Hole shown in picture but could have slot.

Measures 9 3/8" (240mm) long.

VW EXHAUST & INTAKE NUTS

For 8mm threaded stud, but with smaller 11mm wrench size for easier access than the regular 13mm nuts.

EMPI 9522 Transaxle Lock Nut Kit

Complete kit featuring nylon-insert locking nuts

VW ENGINE COMPLETE HARDWARE KIT

All the bolts, nuts and washers required for the assembly of the engine. For VW Bug, Bus, and Ghia.

VW STARTER BOLT

Volkswagen style starter bolt

N0124161 CL Shaft Circlip, Early 16mm

N0124201 Circlip for VW Clutch Cross Shaft, Late 20mm

VW ENGINE TIN FAN SHROUD SHEET METAL SCREWS

Set of 12 screws 6x10mm in size. Fits VW Bug, Bus, Ghia, engine tin. Replace your old, rusted or stripped VW engine tin screws with this new set of zinc screws.

VW ENGINE TIN FAN SHROUD SHEET METAL SCREWS

Set of 24 screws 6x10mm in size. Fits VW Bug, Bus, Ghia, engine tin. Replace your old, rusted or stripped VW engine tin screws with this new set of zinc screws.

VW ENGINE TIN FAN SHROUD SHEET METAL SCREWS

6x10mm in size. Fits VW Bug, Bus, Ghia, engine tin. Replace your old, rusted or stripped VW engine tin screws with this new set of zinc screws. Each

N110088 8mm Nuts

M 8 CL 8 ZN Hex Nut Din 934

THE MOST COMMON FASTNER ON AN AIRCOOLED VW. THIS NUT IS 13MM WRENCH SIZE AND IS 8MM X 1.25 THREAD SIZE.

SOME USES INCLUDE BUT ARE NOT LIMITED TO:

CARB TO MANIFOLD

DUAL PORT END CASTINGS TO HEAD

MUFFLER TO HEAD

HEATER BOX TO HEAD

ENGINE CASE PERIMETER

N110624 Cap Oil Drain Plate Nut

Fits all 12-1600cc beetle Style Engines

O.E. German Recycled

When adjusting your VW's valves, replace those worn, damaged, or stripped valve adjusting nuts with these new replacements. 8X1.0mm; set of 8.

SOLD AS SET OF 8

M 8 Wave Washer - Waved, Steel Plain. DIN 137 B

N144521 Step Stud for VW Drain Plate

6mm x 8mm