|
HOW TO KEEP YOUR VW ALIVE FOR THE COMPLETE IDIOT BOOK
$27.99
|
Empi 3550 VW Bug Front Drivers Side Floor Pan 1/4 Panel 111-701-059Q
$32.99
|
EMPI 3551 VW Bug Front Passenger Side Floor Pan 1/4 Panel 111-701-060Q
$32.99
|
EMPI 3552 VW BUG REAR FLOOR PAN 1/4 PANEL 112-701-063Q DRIVER SIDE
$32.99
|
|
EMPI 3553 VW Bug Rear Passenger Side Floor Pan 1/4 Panel 112-701-064Q
$32.99
|
VW Beetle Bug Split Oval German Horn Grills 52-67
$10.00
|
Set of new screws and new nuts to use for adjusting the valves on a Type 1 VW valve train
These are standard screws and standard nuts common on stock engines.
Works with our 1.25:1 rocker arms too! $16.95
|
EMPI 8185 VW BUG ENGINE 76MM COUNTERWEIGHTED STROKER CRANKSHAFT CRANK CHEVY JOURNALS
$329.99
|
|
EMPI 8186 VW BUG ENGINE 78MM COUNTERWEIGHTED STROKER CRANKSHAFT CRANK CHEVY JOURNALS
$329.99
|
EMPI 8187 VW BUG ENGINE 82MM COUNTERWEIGHTED STROKER CRANKSHAFT CRANK CHEVY JOURNALS
$329.99
|
EMPI 4549 VW BUG GHIA CHROME EMERGENCY BRAKE HANDLE COMPLETE 113-798-305CR
$28.99
|
Chrome 3 gauge hole dash panel made to accept all 2 1/16" gauges.
$10.99
|
|
Chrome 3 gauge hole dash panel made to accept all 2 1/16" gauges.
$10.99
|
Chrome 2 gauge/1 tach hole dash panel made to accept all 2 1/16" gauges and 3 1/8" tachs.
$9.99
|
Chrome VW gauge ready dash panel made to accept all 2 1/16" gauges.
$8.50
|
Chrome 2 gauge hole dash panel made to accept all 2 1/16" gauges
$9.99
|
|
VW Stock axle spacers just won't hold up to the abuse of off-road and high-performance applications. Super duty hardened spacer set is the answer. 4 piece set.
$49.90
|
Black VW urethane shifter box bushing
$5.95
|
Much like the original one it replaces, this fits VW Type 1s 1965 and newer; and other applications that use this style of coupler. The key improvement on this unit is the two inserts for the cage have been made out of urethane so the shifter linkage will be much tighter and responsive. A must do upgrade for almost every car that uses this style of shift coupler!
$10.99
|
The strength and durability of urethane will out-last and out-perform standard rubber snubbers. Install urethane and never look back! Fits 1958-1979 VW Beetles.
$10.99
|
The strength and durability of urethane will out-last and out-perform standard rubber products in every application. Replaces early VW Type 1 & Type 3 style outer torsion bar bushings. $12.99
|
The strength and durability of urethane will out-last and out-perform standard rubber products in every application. Fits VW Type 1 style torsion bars only.
$12.99
|
The strength and durability of urethane will out-last and out-perform standard rubber products in every application. Fits VW Type 1 style torsion bars only.
$12.99
|
VW Front ball joint beam urethane bushings, inner and outer. The strength and durability of urethane will out-last and out-perform standard rubber products in every application. 4 pieces.
$29.00
|
|
The ultimate alternator/generator strap. The great and long lasting looks, strength, and durability of stainless steel with the positive security of the t-bolt style. A must for off roading.
$5.99
|
VW bolt-on full flow oil filter mounts make filter mounting easy. Features inward and outward polished aluminum, these accommodate most off-road and drag race applications! All hardware included.
$19.90
|
VW bolt-on full flow oil filter mounts make filter mounting easy. Features inward and outward polished aluminum, these accommodate most off-road and drag race applications! All hardware included.
$19.90
|
This billet aluminum sump plate will never bend or distort due to over-tightening, unlike stock plates that can cause dangerous leaks. Since it is CNC machined from high grade aluminum billet, it also adds a custom look to any engine!
$26.95
|
|
EMPI 16-9515 VW BUG ENGINE CASE THREADED OIL GALLEY PLUG KIT
$12.99
|
Help prevent oil starvation in your VW by installing this "mini" sump to increase oil capacity.
$28.99
|
This kit provides consistent oil pick up in your VW Bug, Ghia, or Bus. The supplied sump plate depression keeps the pick-up extension submerged in oil at all times. $49.99
|
EMPI 16-9522 VW BUG TYPE 1 ENGINE PERFORMANCE CRANK CRANKSHAFT GEAR SPACER
$9.99
|
|
Use this billit camshaft plug during engine assembly for a secure leak free seal.
$7.99
|
EMPI 16-9527 VW BUG ENGINE CASE HEX HEAD OIL RELIEF SPRING PLUG
$7.95
|
Set of four copper head gaskets for 90.5-92mm cylinders
$24.99
|
Set of four copper head gaskets for 90.5-92mm cylinders .050"
$24.99
|
|
Set of four copper head gaskets for 92mm cylinders .060"
$29.99
|
Set of four copper head gaskets for 94mm cylinders .040"
$24.99
|
Set of four copper head gaskets for 94mm cylinders .050"
$24.99
|
Set of four copper head gaskets for 94mm cylinders .060"
$29.95
|
|
Allows you to install ball joint rotors onto king pin spindles. OUTER BEARING
$7.86
|
CAST ALUMINUM OIL SUMP IS ONLY 1 3/4" DEEP. ADDS OIL CAPACITY AND OFFERS IMPROVED FILTRATION AND EASY BOLT ON INSTALLATION. FILTER DESIGN ALLOWS FOR UNIMPEDED OIL FLOW EVEN IF THE FILTER GETS PLUGGED. STAINLESS STEEL MICRON FILTER CAN BE CLEANED AND REUSED
$139.99
|
EMPI 17-2872 VW BUG GHIA ENGINE OIL MINI SUMP W/ FILTER
$54.99
|
This adapter allows you to run both your stock oil cooler, along with an external cooler and/or a remote oil filter.
$44.99
|
|
EMPI 17-2874 VW BUG GHIA ENGINE OIL SUMP FILTER
$13.99
|
Increase the RPM potential of your air cooled Volkswagen engine and get more power.
Our high-strength Rocker Shaft Kit helps eliminate rocker shaft side play that causes rocker arm galling and clip & washer failure.
Our kit includes two precision ground high strength shafts, hardened steel spacers & solid shims, and all necessary installation hardware is included.
Can be used with either stock 1:1 rockers or our high performance 1.25:1 rockers for added power!
Best when used with EMPI's swivel foot adjusters. $49.95
|
Never install a new camshaft without new cam followers. Get longer life from your VW engine with our performance cam followers. Manufactured to exacting tolerances and Maganese Phosphate coated.
$39.95
|
VW 31mm surface contact lifters have 15% more contact than stock lifters to reduce scuffing and early lobe wear. Made from one-piece billets and precision ground.
$59.90
|
|
VW high grade cam bolts for attaching our P/N 21-2500 cam gear.
$2.99
|
VW steel cylinder head spacers (.030") allow for adjusting deck height easily without removing the cylinders. Compensates for zero deck height when heads have been machined, or in stroker setups. 1500-1600cc.
$9.25
|
VW steel cylinder head spacers (.060") allow for adjusting deck height easily without removing the cylinders. Compensates for zero deck height when heads have been machined, or in stroker setups. 1500-1600cc.
$9.25
|
EMPI 21-6010 VW BUG ENGINE CASE / CYLINDER SHIMS .010
$7.49
|
|
EMPI 21-6020 VW BUG ENGINE CASE / CYLINDER SHIMS .010
$7.49
|
EMPI 21-6030 VW BUG ENGINE CASE / CYLINDER SHIMS .030
$7.49
|
EMPI 21-6040 VW BUG ENGINE CASE / CYLINDER SHIMS .040
$7.49
|
.060" cylinder shims for VW Type 1 85.5mm cylinders
$7.50
|
|
EMPI 21-6090 VW BUG ENGINE CASE / 85.5 mm CYLINDER SHIMS .090
$7.49
|
EMPI 21-7020 VW BUG ENGINE 90.5/92 CYLINDER SHIMS .010
$7.49
|
Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 & 92mm cylinders.
$7.99
|
Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 & 92mm cylinders.
$7.99
|
|
Steel shims allow for adjusting deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined clearanced for standard 8mm studs. Set of 4. Fits 90.5 & 92mm cylinders.
$7.99
|
Steel shims for increasing deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined. Fits 90.5 and 92mm bore VWs.
$7.99
|
.010" cylinder shims for VW Type 1 94mm cylinders
$7.50
|
Steel shims for increasing deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined. Fits 94mm bore VWs.
$7.99
|
|
Steel shims for increasing deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined. Fits 94mm bore VWs.
$7.99
|
Steel shims for increasing deck height without machining the pistons. Corrects for increase in stroke and compensates when case is surface machined. Fits 94mm bore VWs.
$7.99
|
Steel spacers allow for increasing the deck height without removing the cylinders. Compensates for zero deck height when heads have been machined or in stroker applications. Set of 4.
$9.99
|
VW front end adjuster. Requires one on each tube; cutting and welding required! For use on models 65 and prior.
$15.00
|
|
Aluminum caster shims correct and improve front end geometry on your lowered Volkswagen. Bug, Ghia, Type 3.
$9.90
|
Longer VW caster shim bolts provide proper thread grip at pan head.
$7.50
|
Specially modified ball joints allows more suspension travel for lowered or raised VW bugs. Fits all Type 1's 66-77.
$13.99
|
Pair of brackets to convert a Super Beetle with drum brakes to a Super Beetle with disc brakes!
$79.95
|
|
2.5 inch drop spindles for link pin axle with drum brakes. Fits 1965 and earlier VW Bug, Buggy, Ghia
$189.99
|
2.5 inch drop spindles for king pin axle with drum brakes. Fits 1966-1977 earlier VW Bug, Buggy, Ghia
$149.99
|
VW rear disc brake conversion kit with emergency handbrake for all IRS & Swingaxle Type 1s. Standard 4x130 bolt pattern
$349.00
|
Rear disc brake pads replacement for EMPI Calipers. These are the pads that are used in many of the rear disc brake kits that EMPI sells. For rear calipers with emergency brakes.
$24.99
|
|
2.5 inch drop spindles for link pin axle with disc brakes. Fits VW Bug, Buggy, Ghia with disc brakes
$124.99
|
Basic VW carburetor repair kits come with accelerator pump diaphram, needle/seat and all necessary o-rings & gaskets.
$29.00
|
One pair of rubber hood hold downs for VW hoods. 4 3/4" overall length of rubber; for VW Beetles, Dune Buggies, & Sandrails. A must for your Baja Bug!
$7.99
|
EMPI 3033 VW BUG BEETLE HIDDEN STEREO GLOVE BOX COMPARTMENT 1958-64
$35.95
|
|
Four piece rear well and cargo area carpet kit for 1954-1977 VW Baja Beetle Sedan
$36.99
|
Precision machined from cast iron with a high quality finish & ground gear/gasket surface, this is the best pump cover available! Impoved design increases pulley and sheet metal clearance issues. Cover is threaded 3/8" NPT and comes with complete 1/2" hose fitting & gasket. Fits all VW pumps with 8mm bolt holes.
$17.95
|
Easily adapt to most cars. Complete with mounting plate and hardware. May require drilling and fitting. (Intended for light use only.)
$97.99
|
Black roller pedal that allows smoother acceleration for your air cooled vw! Fits all Type 1s, Beetle, Buggy, Ghia, and Sandrail.
$5.99
|
|
Shorten your clutch, emergency brake and throttle cables quickly. A must for all buggies that have shortened pans.
$7.99
|
Shorten your emergency brake cable quickly and easily. A must for VW Buggies with shortened pans.
$5.99
|
Shorten your throttle cable quickly and easily.
$1.99
|
2 piece VW throttle cable extending kit that can be installed onto the existing end of a throttle cable.
$3.25
|
|
DISCONTINUED - Please see EMPI 3180
$11.00
|
This VW steering shaft support fits 7/8" sterring shafts and is self-aligning for easy installation. Features an oil impregnated bronze bushing with oiling cup for longer life!
$13.90
|
This VW bug to bus transmission mount kit allows for installing a Type 2 I.R.S. transmission into a Type 1 chassis. Featuring a heavy duty steel saddle, mount, and straps, eliminate your stock mounts & saddle for maximum support with no flex. A must for competition use!
$49.95
|
This EMPI branded throwout bearing fits VW models 1970 & earlier: Bug / Beetle, Karmann Ghia, Bus Transporter; Type 2, and Type 3.
$26.99
|
|
Small intake boot clamps for Type 1 Volkswagen dual port engines. Sold in pairs.
$2.49
|
A pair of VW large intake manifold boot clamps.
$2.49
|
A pair of VW intake manifold gaskets fits Type 2 & Type 4 engines; 1700-2000cc. 3 & 4 bolt gaskets.
$2.99
|
This dual port intake manifold end castings kit is thick enough for porting and polishing. For 71-74 Dual Port engines
$76.99
|
|
Sometimes necessary when doing an alternator conversion. Spaces up the stock carburetor. Comes with studs, nuts, and gaskets.
$13.99
|
A pair of VW dual port intake manifold gaskets for dual 40mm carburetors.
$2.00
|
Dual port Volkswagen intake manifold gaskets with larger intake face. This is for a pair.
$2.00
|
|
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.JPG)
IbWR!~~_12 (Custom).jpg)
